Description
The Cox AirFlow 2 is a pneumatic cartridge dispenser for 310ml (10.5 oz) one-part sealants and adhesives. Air pressure acts directly on the plunger, so output stays smooth and effortless across long production runs where a manual gun would tire the operator.
What the Cox AirFlow 2 delivers
The tool is light at roughly 0.8 kg, with a glass-filled nylon handle and an anodized aluminum barrel that balances well in the hand through a long shift. A regulator on the handle meters air to the plunger for precise bead control and a clean cut-off, which reduces flow-on and the noise common to older air guns. Maximum thrust is about 1.2 kN at up to 6.8 bar (100 psi), which covers low to medium viscosity material with room to spare. The simple air-on-plunger design has few wear parts, so service is quick and downtime stays low.
Where the Cox AirFlow 2 works
It fits assembly lines, glazing benches, and repetitive sealing tasks running low to medium viscosity material in standard 310ml cartridges. Because the air system carries the load, a single operator can hold steady output for hours without the hand fatigue a manual gun causes. Connect it to shop air through a standard coupling and set the regulator to the bead size you need. Consistent air pressure also means consistent bead width, which matters on visible joints and production work where every part has to match.
| Specification | Detail |
|---|---|
| Cartridge capacity | 310 ml (10.5 oz) |
| Type | Pneumatic, single component |
| Max thrust | About 1.2 kN |
| Max air pressure | 6.8 bar (100 psi) |
| Weight | About 0.8 kg |
Confirm your cartridge size and air supply before ordering. See the full range of pneumatic and manual dispensers, and review manufacturer specs at Cox.
Need Help?
Need help matching a pneumatic dispenser to your cartridge format? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.