Albion H10D Viper Line Manual Skeleton Cartridge Gun

Description

The Albion H10D Viper Line manual skeleton cartridge gun is grouped with **dispensing valve parts** for teams that maintain adhesive and sealant application tools across jobsites, benches, and service carts. It handles standard 1/10 gallon cartridges with a 10:1 thrust ratio, a hex rod drive, and no-drip control for common one-component materials.

### Where dispensing valve parts support cartridge work

Manual cartridge guns are the everyday side of dispensing equipment. They do not meter material like a pneumatic valve, but they still determine bead control, operator fatigue, cartridge prep, and cleanup. The H10D is built for simple jobs where a full barrel applicator would add cost or weight. The skeleton frame keeps the cartridge visible, which helps the operator check label, color, lot, and remaining material during the pass.

The Viper Line is suited to construction sealants, acrylic caulks, silicone sealants, light adhesives, and maintenance products in standard cartridges. The 10:1 drive gives more push than a light painter’s gun while staying practical for lower to medium viscosity materials. A no-drip release helps reduce run-on after the trigger is released, which matters along trim, panel edges, sink cutouts, and repair beads where extra material creates cleanup work.

### How these dispensing valve parts are used

Cut the nozzle to the bead size, use the built-in spout cutter when appropriate, pierce the cartridge seal with the puncture tool, and load the tube into the skeleton frame. Start with steady trigger pressure until material reaches the tip. Keep the gun angle consistent and release pressure before lifting away from the joint. On long beads, rotate your wrist rather than bending the nozzle hard against the substrate.

For maintenance teams, the H10D is easy to keep in multiple trucks because it accepts a common cartridge format and does not need air lines, batteries, or spare chargers. The ladder hook helps keep the applicator off the floor between passes, while the open frame makes it fast to swap cartridges. Keep one in each sealant kit when crews move between punch-list repairs, countertop installs, and light shop assembly.

### Specs for Albion dispensing valve parts | SKU | ALB-H10D |
| -| -|
| Model | H10D Viper Line |
| Tool Type | Manual skeleton cartridge gun |
| Cartridge Size | 1/10 gallon |
| Drive Ratio | 10:1 |
| Rod Style | Hex rod |
| Features | No-drip release, spout cutter, puncture tool, ladder hook | Order this gun when crews need a low-complexity applicator for repeated cartridge work and fast field replacement. Browse related [dispensers, mixers, and nozzles](https://www.chemical-concepts.com/product-category/dispensers-mixers-nozzles-3/) for mixer tips, cartridges, and dispensing accessories that belong in the same kit. For manufacturer background on applicator families, visit [Albion Engineering](https://www.albioneng.com).

### Need Help?

Need help choosing thrust ratio for cartridge sealants or adhesives? Call [(800) 220-1966](tel:8002201966) or email [[email protected]](mailto:[email protected]).