Albion B26T200 Cartridge Gun, 26:1 Drive

Description

The Albion B26T200 cartridge gun handles twin 100 mL side-by-side cartridges in a 1:1 mix ratio, and also runs 215 mL twin cartridges at 2:1. Built on Albion’s B-Line platform, the 26:1 drive ratio pushes thick two-component adhesives, epoxies, and sealants through a static mixing nozzle without the arm fatigue a lower-ratio gun creates on stiff material. It is designed for structural and semi-structural bonding jobs where hand strength alone will not move the product evenly.

Where the Albion B26T200 Cartridge Gun Works

• Curtain wall and panel installation using structural silicone or polyurethane
• Two-part epoxy anchoring and chemical anchor setting
• Multi-component acrylic and polyurea dispensing on manufacturing lines
• Automotive body shop and fabrication work with thicker two-part compounds
• Any job running twin side-by-side cartridges instead of coaxial cartridges

Build Quality Behind the Albion B26T200 Cartridge Gun

Albion’s double gripping plates and steel trigger are built for repeated daily use on job sites, not occasional shop work. An adjustment screw lets the operator take up slack as the gun wears, so the stroke stays tight instead of getting sloppy over years of service. Full carriage containment units keep both cartridge halves aligned through the stroke, and the side-load design means reloading does not require pulling the plunger rod all the way out. The full-size handle spreads grip pressure across the whole hand, which matters on a gun built to move 26:1 thrust.

Albion B26T200 Cartridge Gun Specifications

Pair this gun with the correct static mixing nozzle for the cartridge brand in use. Browse Chemical Concepts dispensing tools and mixing nozzles for matching hardware. Albion Engineering documents full drive specifications and accessory fit on its manufacturer site.

Need Help?

Need help matching a static mixing nozzle to your two-part cartridge brand? Call (800) 220-1966 or email [email protected].