Albion 30oz B-Line Manual Mortar and Grout Gun w/ 12:1 Drive

Description

The Albion B12MG mortar gun holds 30 oz (one quart) of mortar or grout and drives it through a rotating swivel carriage built for tuck pointing brick and stone veneer joints without dripping or overshooting the joint. The 12:1 ratio drive gives enough mechanical advantage to push stiffer mortar mixes by hand, and the kit ships ready to load with a barrel, two nozzles, and a mixer.

Where the Albion B12MG Mortar Gun Gets Used

• Tuck pointing brick joints and re-pointing older mortar joints
• Pointing stone veneer and cultured stone installations
• Grouting tile joints where a caulk-gun-style applicator controls the bead better than a trowel
• Corner and edge work using the rotating swivel carriage

Durability of the Albion B12MG Mortar Gun

The same double gripping plates and steel trigger found across Albion’s B-Line guns carry over to the B12MG, so the tool holds up under daily jobsite use rather than failing after a season. An adjustable plunger keeps the seal tight against the barrel wall, which stops the leak-back that ruins a clean pointing line. The gun disassembles fully for cleanup between mortar colors or batches, and the rotating carriage lets an installer work around outside corners without repositioning the whole gun. The tool is light enough for one-hand operation on a ladder or scaffold, which matters when pointing an upper-story elevation.

Mortar Gun Specifications

Match this gun with masonry-grade mortar or grout sized for the barrel capacity. Browse Chemical Concepts dispensing tools and mixers for compatible accessories. Albion Engineering lists full assembly and cleaning instructions on its manufacturer site.

Need Help?

Need help picking the right nozzle size for your joint width? Call (800) 220-1966 or email [email protected].