Description
This Araldite 2014 200ml cartridge holds Huntsman Araldite 2014 A/B, a two-component, room temperature curing, thixotropic structural epoxy paste for bonding metals, electronic components, and GRP structures. The 200ml dual cartridge mixes 2:1 through a static mixer and holds four times the adhesive of the 50ml cartridge, which suits larger gap-filling bonds and repeat jobs.
Package Details
| Property | Value |
|---|---|
| Product | Araldite 2014 A/B two-part epoxy adhesive |
| Package | 200ml dual cartridge |
| SKU | HUN4160808 |
| Mix Ratio | 2:1 by volume, 100:50 by weight |
| Pot Life | ~40 minutes at 77°F (100 g mass) |
| Fixture Time | 3 hours (180 minutes) to reach 145 psi lap shear at 73°F |
| Gap Fill | Non-sagging up to 0.197 in (5 mm) |
| Dispensing | 200ml 2:1 gun and static mixer |
| Related Composite Product | Araldite 2014 A/B Epoxy Adhesive |
Cure Time by Temperature
| Cure Temperature | Time to 145 psi (1 MPa) Lap Shear | Time to 1,450 psi (10 MPa) Lap Shear |
|---|---|---|
| 50°F | 14 hours | 20 hours |
| 59°F | 8 hours | 11 hours |
| 73°F | 3 hours | 5 hours |
| 104°F | 60 minutes | 80 minutes |
| 140°F | 15 minutes | 20 minutes |
| 212°F | 3 minutes | 4 minutes |
Huntsman technical data sheet, lap shear strength per ISO 4587.
Lap shear data and full specifications are on the Araldite 2014 A/B composite page.
Dispensing the 200ml Cartridge
This cartridge mixes 2:1, not 1:1, so use a 200ml gun with a 2:1 plunger or setting and a static mixer fitted to the cartridge. Huntsman lists the DS200 guns and the Araldite 2000+ mixer for its 200ml cartridges. The DM2X 200 and DP2X 200 are catalog pairings with documented 2:1 settings. Call us if you want to confirm fit before you order.
Guns
- Huntsman DS200 Manual Gun, HUN2961308
- Huntsman DS200 Pneumatic Dispensing Gun, HUN181616700
- Medmix MIXPAC DM2X 200 Manual Gun, 1:1 and 2:1, CON-DM2X200-01-52-01
- Medmix MIXPAC DP2X 200 Pneumatic Gun, 1:1 and 2:1, CON-DP2X200-01-25-01
Static mixer
- Huntsman Araldite 2000+ Mixer, 50 Pack, HUN1549408 (for 200ml and 400ml cartridges)
Where the 200ml Size Fits
- Larger bond areas and gap-filling jobs that would take several 50ml cartridges.
- Vertical and overhead joints where the non-sag paste has to stay put.
- Repeat production bonding where fewer cartridge changes matter.
- Pneumatic dispensing for steadier, repeatable application.
Frequently Asked Questions
What is the mix ratio of the 200ml Araldite 2014 cartridge?
It mixes 2:1 by volume, which is 100 parts Part A to 50 parts Part B by weight. That is different from the 1:1 Araldite 2011 and 2012 cartridges, so check that your gun has a 2:1 plunger or setting before you load it.
What gun does the 200ml Araldite 2014 cartridge use?
Huntsman lists the DS200 manual and DS200 pneumatic guns for its 200ml cartridges. The Medmix DM2X 200 and DP2X 200 are catalog pairings with documented 2:1 settings. All four are listed above. Choose a manual gun for occasional bonding and a pneumatic gun if you dispense often or want a steadier, repeatable application.
What mixer does the 200ml Araldite 2014 cartridge use?
Huntsman lists the Araldite 2000+ Mixer for its 200ml and 400ml cartridges, sold in a 50 pack. The static mixer meters the 2:1 ratio as you dispense, so the cartridge needs a mixer fitted before use.
Is the 200ml cartridge the same adhesive as the 50ml cartridge?
Yes. Both sizes are Araldite 2014 A/B and both mix 2:1. The 200ml cartridge holds four times the adhesive of the 50ml, and the adhesive is the same. The Araldite 2014 A/B composite page has the lap shear data and full specifications for every size.
Questions on fit for your bonding application? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.