Description
Techcon TSD1021-8 is a nylon barb tee elbow and dispenser parts item for routing 1/8 inch ID tubing into a 1/8 NPT connection on compact dispensing equipment. The tee and elbow geometry helps a service line turn cleanly near a valve, reservoir, or manifold while keeping flexible tubing close to the machine body instead of hanging across the work area.
Where dispenser parts like this tee elbow fit
Small fittings shape the reliability of a dispensing station. A clean tubing path reduces kinks, side load, and accidental pulls when operators change cartridges, tips, or fixtures. This style of fitting is used around air lines, material feed paths, and accessory connections where a straight barb would force the tube into a sharp bend. Nylon construction keeps the part light, corrosion resistant, and easy to replace during routine service.
Use this fitting when the equipment layout calls for a 1/8 inch ID barb reference and a 1/8 NPT threaded connection. It belongs with tubing, valves, receiver-head parts, and repair seals. It is not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. Those are cartridge-end consumables, while this component supports the connection hardware that keeps the dispense station plumbed correctly.
Checking dispenser parts before installation
Relieve pressure before service, remove cured residue from the port, and inspect the tubing end before pushing it onto the barb. Cut hardened or distorted tubing squarely so it seats fully. After installation, bring pressure up gradually and check for leaks, tube creep, or movement at the elbow before the station returns to production.
| SKU | TECTSD1021-8 |
|---|---|
| Part Type | Nylon barb tee elbow |
| Tube Reference | 1/8 inch ID |
| Thread Reference | 1/8 NPT |
| Use | Air or fluid routing on compatible dispensing equipment |
| Unit | Each |
Keep fittings like this near tubing, seals, and valve service kits so repairs can be completed without improvising adapter stacks. Browse related dispensers, mixers, and nozzles. For manufacturer background on Techcon dispensing systems, visit Techcon.
Need Help?
Need help confirming barb size, thread size, or fitting style for your dispense setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.