Techcon 1/10 Gallon Cartridge with Plunger, 250 Pack

Description

This 1/10 gallon cartridge (310 mL, HD polyethylene) ships from Techcon with a TS2PW wiper plunger already pushed to the outlet end, so a shop can fill and dispense without a separate plunger-insertion step. Packaged 250 to a case, it carries the industry standard 1/4 NPT output thread found across Techcon’s cartridge line.

Where This 1/10 Gallon Cartridge Fits

Shops that fill their own cartridges with adhesives, sealants, greases, or other viscous fluids use this pre-plunged format to save a manual assembly step on every fill. It works in hand-held or bench-mounted dispensing guns, manual or air-powered, and pairs with Techcon’s G-Series retainer (110-2) sized for the 1/10 gallon format. Production and packaging lines that fill many cartridges per shift benefit most from skipping the separate plunger-loading step this cartridge already has built in.

How This 1/10 Gallon Cartridge Handles in Use

The wiper plunger seals against the cartridge wall to prevent fluid from leaking past during dispensing, and the assembly is rated to 100 psi (6.9 bar) maximum operating pressure, matching Techcon’s standard dispensing gun output. HD polyethylene construction holds up to most adhesive and sealant chemistries without the swelling or softening that can affect low density cartridges under some solvent-based fluids.

Specifications

Confirm your dispensing gun or retainer matches the 1/10 gallon format before filling a full case, since Techcon also runs 2.5 oz, 6 oz, 8 oz, and 12 oz cartridge sizes on different retainers. Browse Techcon cartridges, plungers, and nozzles in our dispensers, mixers, and nozzles category. Full cartridge and component specifications are posted at techcon.com.

Need Help?

Need help matching cartridge size or retainer to your dispensing gun? Call (800) 220-1966 or email [email protected].