Chem-Set 730S Stamped Wing Nut, 1/4-20

Description

The Chem-Set 730S stamped wing nut threads onto a 1/4-20 bolt or screw and lets an installer hand-tighten or remove the connection without a wrench or driver. The stamped wing design gives fingers enough grip to seat the nut firmly on a low carbon steel body while keeping the part light enough for high-volume assembly work.

Where This Stamped Wing Nut Gets Used

Fixture builders and display fabricators reach for this fastener wherever a panel or bracket needs to come apart repeatedly for service, adjustment, or shipping. Cabinetry and countertop crews use the same part on jigs, templates, and fixtures that get assembled and broken down on a regular cycle. Because no tool is required, it also works well on job-site assemblies that get adjusted in the field, and the low profile keeps it from snagging on gloves or packaging during handling.

How This Stamped Wing Nut Performs

The 1/4-20 thread pitch is coarse and right-handed, matching standard bolts and screws up to Grade 5, and the zinc plating resists corrosion through repeated hand assembly and disassembly cycles. At roughly 0.0099 lb per piece, this fastener adds negligible weight to an assembly while still gripping the 1/4-inch nominal bolt diameter securely under normal hand-tightened torque, and the coarse pitch resists cross-threading during quick field assembly.

Order this fastener alongside matching 1/4-20 bolts or screws to keep grade and finish consistent across the assembly. For related fasteners and hardware, browse Chemical Concepts fasteners. For fastener selection and torque guidance across the Chem-Set line, see the Chemical Concepts YouTube channel. Inspect threads before reuse, since a worn wing nut loses clamping force over repeated cycles.

Need Help?

Need help matching this fastener to your bolt grade and assembly cycle? Call (800) 220-1966 or email [email protected].