Techcon TS5000 Rotary Valve Cleaning Kit

Description

The Techcon 5000-013-000 cleaning kit supplies the dispensing valve parts needed to service a Techcon TS5000 Series rotary microvalve. The kit includes a fluid inlet fitting, an O-ring, and a clean out screw, the three spare parts Techcon specifies for a thorough valve cleaning of the feed-screw assembly and fluid path.

Where these dispensing valve parts fit

• Services the Techcon TS5000 Series rotary feed-screw microvalve used for precision dots and continuous beads on XYZ dispensing equipment
• Supports the cleaning procedure Techcon recommends when switching fluids, when material begins to cure inside the valve, monthly during continuous use, or when the tip clogs often
• Matches TS5000 valves across motor options (2.7W, 6W, and 6W with digital encoder) and both 8 and 16 pitch feed screws

A TS5000 valve that starts skipping dots, dispensing inconsistent bead widths, or leaking at the fluid inlet is usually due for the cleaning this kit supports. Replacing the O-ring and clean out screw during a full cleaning restores the seal points that keep pressure consistent through the feed screw, and a fresh inlet fitting prevents a worn thread from becoming a leak point. Production lines running a TS5000 continuously benefit from keeping this kit on a fixed replacement schedule rather than waiting for a valve to fail mid-run, since an unplanned valve failure on an active production line costs far more downtime than a scheduled, planned cleaning cycle.

Dispensing valve parts included

• Fluid inlet fitting
• O-ring
• Clean out screw

Order the 5000-013-000 kit on a fixed schedule for valves in continuous production, or on demand when a TS5000 valve needs a full cleaning. Browse related dispensers, mixers, and nozzles. For current manufacturer information, visit Techcon.

Need Help?

Need help scheduling a TS5000 valve cleaning or confirming kit contents? Call (800) 220-1966 or email [email protected].