Description
Rated Support for Wider Standing-Height Counters
The 24 in. x 29 in. CounterBalance Workstation Bracket is built for counters and work surfaces that need real span without a visible leg underneath. At this size the bracket pair is rated to 2,100 lbf, enough to carry a break room counter, a standing height workstation, a shipping and receiving bench, or a servery line loaded with equipment, product, or seated use. The 1/8 in. steel construction and 1.5 in. mounting surface give installers a solid connection point instead of a thin stamped bracket that flexes under real commercial load.
Gray Powder Coat Finish for a Clean, Durable Look
Each bracket carries a gray powder coat finish applied to resist chipping, scuffing, and the daily wear of a working facility. Gray is a practical match for most commercial counter and millwork finishes without drawing attention to the hardware itself. The finish also stands up to routine cleaning and sanitizing, which matters in break rooms, food service counters, and healthcare or lab support areas where surfaces get wiped down multiple times a day.
Reversible Design, Sold in Pairs
CounterBalance Workstation Brackets are reversible, so the same bracket pair works whether the counter is being supported from the left or right side of a run, and ships as a matched pair rather than individual pieces. That keeps ordering simple for facilities and contractors speccing multiple counter runs. Multiple 1/4 in. mounting holes on each bracket give installers flexibility to hit wall framing or blocking without re-templating the layout, and the bracket allows the counter to overhang up to 6 in. beyond the bracket’s own footprint for a cleaner finished edge.
Installation and Spacing
Mount brackets to wall studs, blocking, or a structural ledger behind the finished surface, keeping pairs on consistent centers across the run to match the counter’s expected load. For longer runs or heavier anticipated loads, such as a servery or a counter that will see regular seated use, add brackets at closer intervals rather than relying on two brackets to carry the full span. Chemical Concepts stocks the full CounterBalance Steel Bracket line in multiple sizes and both gray and primed finishes, so a facility can standardize bracket hardware across break rooms, reception counters, and workstations from one source.
Specifying This Bracket
Use the 24×29 gray bracket where the counter depth and projected load call for the 2,100 lbf rating, and confirm spacing against the full run length before the countertop is templated. For ergonomic guidance on setting standing and sit-stand work surface heights, see OSHA’s ergonomics program overview. Procurement and facilities teams can call Chemical Concepts at (800) 220-1966 or email [email protected] to confirm bracket count for a specific job before ordering.







Reviews
There are no reviews yet.