CounterBalance Workstation Bracket, White, 12 in x 18 in

Description

The CounterBalance Workstation Bracket in White is a structural support bracket sized 12 inches by 18 inches, built to carry floating countertops, workbenches, and work surfaces without a visible leg or corner brace underneath. It mounts to load-bearing wall studs and is sized to support an overhang extending up to 6 inches beyond its own length, matching the industry-standard recommendation for cantilevered work surfaces.

Where the CounterBalance Workstation Bracket Gets Used

This bracket size fits kitchen islands, garage workbenches, ADA-compliant service counters, reception desks, computer stations, and other floating work surfaces where the underside has to stay open and clean. The 12 in by 18 in size sits in the middle of the Workstation Bracket lineup, which runs from 5 in by 8 in up to 24 in by 29 in, so a fabricator can match bracket depth to the actual overhang instead of over-building the support or leaving it undersized. White finish blends with painted cabinetry, light millwork, white laminate, and solid-surface countertops so the hardware disappears against the substrate around it.

Installing the CounterBalance Workstation Bracket

Attach the vertical leg to a load-bearing wall stud, then set the countertop, bench top, or work surface directly onto the horizontal arm. Multiple 1/4 inch mounting holes let installers pick fastener spacing to match stud layout without drilling new holes into the bracket itself. Because the bracket carries load through the wall framing rather than through a leg or corner post, the space below the surface stays fully open for seating, knee room, rolling storage, or a trash pullout. Pair two or more brackets across a run according to the published load chart for the surface material and thickness being installed.

Browse other sizes and finishes in our countertop brackets category. For installation walkthroughs and load-rating guidance, see the Chemical Concepts YouTube channel.

Need Help?

Need help sizing this bracket for your span? Call (800) 220-1966 or email [email protected].