DEVCON FasMetal – 0.75 LB

Description

DEVCON FasMetal™ is a premium, 100% solids epoxy putty designed for fast, emergency repairs on metal surfaces. This high-strength, machinable epoxy bonds securely to stainless steel, pipes, housings, and keyways, making it ideal for industrial applications requiring durability and chemical resistance. With a quick set time of 5 minutes and a full cure in just 6 hours, FasMetal™ is the go-to solution for emergency maintenance and long-term metal restoration.

Key Features & Benefits

✔ Fast Curing – Sets up in just 5 minutes, full cure in 6 hours
✔ High Strength – Offers 12,700 psi compressive strength
✔ Temperature Resistant – Withstands dry heat up to 250°F (121°C)
✔ Easy-to-Use – 1:1 mix ratio, no sagging on vertical surfaces
✔ Machinable & Paintable – Once cured, can be drilled, tapped, or coated
✔ Excellent Chemical Resistance – Withstands cutting oils, gasoline, and mineral spirits

Common Applications

🔹 Industrial Repairs – Breakers, transformers, housings, pipes, and keyways
🔹 Emergency Leak Sealing – Patching holes in coal fuel lines and tanks
🔹 Structural Reinforcement – Bridging large gaps with fiberglass or expanded metal
🔹 Equipment Maintenance – Preventive repairs on machinery and metal parts

Technical Specifications

• Color: Grey
• Mix Ratio (By Volume): 1:1
• Working Time: 4 minutes (0.75 lb mass)
• Functional Cure: 1 hour
• Full Cure: 6 hours
• Compressive Strength: 12,700 psi (87.6 MPa)
• Flexural Strength: 7,700 psi (53 MPa)
• Hardness: 90 Shore D
• Temperature Resistance: Dry: 250°F (121°C), Wet: Not Rated
• Chemical Resistance: Resistant to cutting oils, gasoline, and mineral spirits

Application Instructions

1. Surface Prep: Clean and grit-blast the surface for best adhesion.
2. Mixing: Combine resin and hardener using a 1:1 ratio. Mix thoroughly until streak-free.
3. Application: Apply directly to the repair area, pressing firmly to ensure maximum surface contact.
4. Curing: FasMetal™ reaches functional cure in 1 hour and is fully cured in 6 hours.

For maximum durability, heat cure at 200°F (93°C) for 4 hours after initial room-temperature curing.

Order Now from Chemical Concepts!

Get your DEVCON FasMetal™ fast-curing epoxy today for reliable, high-strength industrial repairs. Contact us for expert assistance or place your order online now!