Techcon TS5620HU Fluid Housing Repair Kit

Description

The Techcon TS5620HU F/H repair kit is a fluid housing service kit for the TS5620HU horizontal diaphragm valve with UHMWPE wetted parts. It is one of the dispensing valve parts maintenance teams use when a valve body needs a wetted-section refresh while the air cylinder, controller, and installed station remain in place.

Where dispensing valve parts fit

The TS5620HU valve is built for low to medium viscosity fluids and uses an internal spring return with a short opening stroke for quick shutoff. UHMWPE wetted parts are commonly selected for cyanoacrylates, anaerobics, solvents, primers, activators, inks, and similar materials that need chemical compatibility at the valve face. When the fluid housing, outlet adapter, screws, or related fittings are worn or contaminated, replacing the kit can restore clean material flow without changing the whole dispensing setup.

Kit details and use

• Fits Techcon TS5620HU horizontal diaphragm valves.
• Supports UHMWPE fluid housing maintenance on the wetted section.
• Used in low to medium viscosity adhesive, coating, ink, and primer dispensing.
• Pairs with time and pressure controllers commonly used with TS5620 valves.
• Useful for repair carts, production spares, and planned valve service intervals.

Before installation, confirm the valve model, body material, and fluid compatibility. Keep the diaphragm dry during service, lubricate only the O-rings and seals called out in the guide, and torque UHMWPE body screws to the specified value. For related valves, tips, and service supplies, browse dispensers, mixers, and nozzles. Manufacturer background is available from Techcon.

Ordering dispensing valve parts

Choose this kit when a TS5620HU valve needs fluid housing repair and the process needs the same UHMWPE material path. Need help checking valve material, fluid type, or controller setup? Call (800) 220-1966 or email [email protected].