FITTING, 1/4NPT MALE X 1/4″ TUBE

Description

These dispenser parts help connect tubing to the pneumatic and fluid side of a Techcon dispensing system. TSD1002-26 is a male fitting sized 1/4 NPT x 1/4 inch tube, used when a connection must be replaced during service or when a fixture build calls for a matching spare.

dispenser parts for air and fluid lines

A fitting this small can still affect the whole dispense process. Damaged threads, poor tubing grip, or residue at the connection can cause leaks and make a valve or pressure pot seem unstable. Replacing the fitting with the correct size restores the connection point before a technician starts chasing larger process changes.

The 1/4 NPT male side gives the threaded connection, while the 1/4 inch tube side matches common line routing in dispensing benches and small production cells. Keep the part with other fittings, tubing, regulators, and valve service items so maintenance can correct a line issue in one visit.

For best ordering accuracy, compare the old part against the machine bill of materials, the tube outside diameter, and the port size on the controller, reservoir, or valve body. Do not force a near-match fitting into service; the cost of the connector is small compared with the downtime from repeated leaks or inconsistent shots.

Checking dispenser parts during troubleshooting

When a bead, dot, or fill pattern changes, inspect the full path before adjusting pressure or time. This fitting is not a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle style outlet; it is part of the support hardware that lets the material reach the valve or tip consistently. If the outlet is blocked, replace the nozzle or needle. If the line connection is loose, replace the fitting.

Browse related dispensers, mixers, and nozzles, or visit Techcon for manufacturer background.

Need Help?

Need help checking whether a fitting, tube, or outlet is the source of drift? Call (800) 220-1966 or email [email protected].