Techcon TSD1002-37 Push Tube Fitting, 5/32 in OD, 10-32 Male

Description

The Techcon TSD1002-37 push tube fitting is a small dispenser parts replacement for air-side connections on dispensing equipment. It connects 5/32 in OD tubing to a 10-32 UNF male thread, giving maintenance teams a traceable fitting when a damaged or leaking connector needs to be replaced.

dispenser parts for air line repair

Air fittings sit at the point where bench pressure, controller response, and tool actuation meet. A cracked body, loose tube grip, or worn male thread can cause weak response that looks like a valve, gun, or material problem. Replacing the fitting restores the air path before the team starts changing higher-cost parts.

Inspect tubing ends before installation. Cut off scored or ovalized tubing, seat the line fully, and confirm that the thread starts cleanly. If bead output still varies after the fitting is replaced, check the controller setting, cartridge condition, and output side, including any mixing nozzle, 2 part mixing nozzle, or JB Weld mixing nozzle style accessory in the path.

dispenser parts specifications

For repeat stations, keep a few identical fittings with the dispenser service kit so a damaged air connection can be corrected without borrowing parts from another bench. Matching the thread and tube size protects the controller setup from improvised adapters.

After installation, pressurize the station gradually and listen for leaks at the tube and thread interface. A quick low-pressure function check catches most connection issues before fluid reaches the workpiece.

For compatible fittings, hoses, tips, barrels, and maintenance accessories, browse dispensers, mixers, and nozzles. Current manufacturer information is available from Techcon.

Need Help?

Need help matching a fitting to a dispenser, controller, or air line? Call (800) 220-1966 or email [email protected].