Description
Techcon TSD126-324PK Fluid Line Assembly, 24 In. is a Techcon fluid line for dispensing setups that need a 0.100 inch ID natural polyethylene hose with male Luer to female Luer ends. The 24 inch length gives extra reach when the valve, barrel, pressure pot, or fixture sits farther from the work area.
Techcon fluid line Benefits
- 0.100 inch (2.54 mm) inside diameter matches the manufacturer fluid-line table for this series.
- 24 inch (610 mm) length gives more routing room than the shorter 18 inch assembly.
- Male Luer to female Luer ends fit compatible Luer lock fittings in Techcon dispensing systems.
- Natural polyethylene construction keeps the line easy to inspect for residue and flow issues.
- Ten-pack supply helps maintenance benches replace lines during setup changes or scheduled service.
Use this assembly when the station needs more reach without changing to a different fitting family. Route the hose with a smooth bend radius, keep it away from hot surfaces and sharp edges, and support it so the fittings do not carry the full load. Confirm the Luer orientation before installation, especially when several line lengths are stored in the same cabinet.
Common Applications for Techcon fluid line
- Benchtop dispensing setups with standard Luer lock components.
- Adhesive, coating, sealant, grease, and paste feed paths on compatible systems.
- Replacement of stained, kinked, hardened, or plugged fluid lines.
- Production kits that standardize around 24 inch male to female hose assemblies.
Compatible Service Notes
Check the part number, length, inside diameter, and connection pair before ordering. A longer line can add reach, but it should not be used to hide poor routing or tight bends. If material cures in the hose, replace the line and clean the connected fittings before restarting. After installation, dispense a small test bead and inspect both ends for proper seating.
Technical Specifications
| Property | Value |
|---|---|
| SKU | TECTSD126-324PK |
| Manufacturer part number | TSD126-324PK |
| Part type | Fluid line assembly |
| Inside diameter | 0.100 in. (2.54 mm) |
| Length | 24 in. (610 mm) |
| Connection | Male Luer to female Luer |
| Material | Natural PE |
| Package | 10 pack |
Packaging and Ordering
Order this line when the station needs the TSD126-324PK length and connection pair. Browse related dispensers, mixers, and nozzles for fittings, valves, tips, cartridges, and tubing supplies. Current manufacturer information is available from Techcon.
Need Help?
Need help choosing the right line length or Luer connection for your setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.