KDM Hand Water Pump for Keep-Nut Drilling Machines

Description

KDM hand water pump gives Keep-Nut drilling machine users a simple manual water-feed option for jobs where a pressurized water line is not available. It supports the water-cooled drilling process used on KDM equipment, helping crews keep bit temperature down while drilling anchor holes in stone, porcelain, quartz, glass, and other hard surfaces.

KDM hand water pump benefits

• Manual water delivery helps crews run portable drilling setups without depending on a permanent water connection.
• Supports the cooling flow needed to protect drill bits and reduce heat stress on brittle surfaces.
• Useful for field work, retrofits, and service calls where the machine is away from shop utilities.
• Compact accessory format is easy to stage with the drilling machine, hose, and bits.
• Fits the Keep-Nut drilling workflow used for repeatable anchor-hole preparation in hard materials.

Keep-Nut drilling machines are built around water-cooled operation because hard-surface drilling creates heat fast. When crews are working on an install site or moving around large panels, a hand-fed water source can be the difference between getting the hole finished cleanly and overheating the bit. This accessory is a practical backup even for shops that normally run plumbed or pump-assisted cooling.

Common applications for KDM hand water pump

• Portable anchor-hole drilling in stone countertops and facade panels.
• Field drilling on porcelain, sintered stone, and engineered quartz.
• Service work where a Keep-Nut machine is used away from a fixed water connection.
• Backup water feed for crews that want a simple redundancy kit on site.
• Supporting wet drilling jobs that need steady bit cooling to limit cracking risk.

Use and setup notes

Check hose connections and start water flow before the bit enters the surface so the cooling path is established from the first contact. Keep enough water moving to carry away slurry and heat, but do not flood the work area to the point that visibility or footing becomes unsafe. After the job, drain and store the pump clean so debris does not migrate into the feed line on the next setup.

Technical details and documentation

The live Chemical Concepts listing identifies this accessory as SKU CCH-KDM-HP1 with Chem-Set manufacture. The current KDM115 electric drilling machine manual lists a hand pump water supply as part of the machine package, and Chemical Concepts materials describing the Keep-Nut drilling platform note that the machines are water-cooled during operation. For broader installation-tool reference, see the Industrial Fasteners Institute.

Ordering help

This accessory makes sense for crews running Keep-Nut drilling systems in the field, on large panels, or anywhere shop plumbing is not close by. For related drilling accessories, browse our hardware category.

Need help matching this water-feed accessory to a KDM machine, drill bit, or anchor installation setup? Call (800) 220-1966 or email [email protected].