Techcon TS6500 Accessory Holder

Description

This Techcon TS6500 accessory holder is a replacement storage and positioning part for the Techkit Mixer platform. It belongs with the dispensing valve parts that keep cartridge holders, plungers, covers, and collars organized around a two-component mixing station. Use it when the mixer accessories at the bench need a fixed place instead of loose storage that slows changeover.

Where These Dispensing Valve Parts Fit

The TS6500 Techkit Mixer is built around fast kit-size changeover. Operators move between 2.5 oz, 6 oz, 8 oz, 20 oz, and 1/10 gallon cartridge setups by matching the correct holder, plunger, retaining hardware, and cover to the cartridge size. A dedicated accessory holder keeps those pieces together, which matters when several kit sizes are used on the same line. It also helps maintenance teams separate TS6500 hardware from syringe-barrel receiver heads, static mixers, tips, and other bench parts that look similar when stored loose.

This part is most useful at stations mixing structural adhesives, epoxies, potting compounds, and filled resins in Techkit cartridges. The holder does not contact adhesive directly. Its job is to support the hardware around the cartridge and make the next setup easier to repeat. That separation is important for shops that clean or replace wetted parts after each material change but continue using the same mixer frame through a full shift. Keep this holder with the rest of the TS6500 changeover set so operators can inspect all size-specific parts before loading a cartridge.

How the TS6500 Holder Supports Changeover

Keeping the right accessory set together reduces mistakes during cartridge swaps. A 1/10 gallon holder should not be confused with 20 oz hardware, and a plunger cover for the small-kit range should stay away from the larger 20 oz assembly. This holder gives the accessories a clear home so operators can return parts after cleaning, inspection, or size conversion. It also gives supervisors a quick visual check that a station has the hardware needed before a batch begins.

For maintenance teams, the holder is also a practical staging piece. Worn collars, cracked covers, and missing fasteners are easier to catch when every part returns to the same location after service. That kind of setup discipline helps a TS6500 station move from one cartridge size to another without borrowing parts from another bench.

Dispensing Valve Parts Specs

Order this holder when a TS6500 station needs cleaner accessory control around repeated cartridge-size changes. Browse our dispensing and mixing accessories for matching cartridge holders, plunger covers, retaining collars, and other Techkit mixer parts. The Techcon product line includes the TS6500 mixer platform and related two-component dispensing hardware.

Need Help?

Need help matching TS6500 accessories to cartridge size? Call (800) 220-1966 or email [email protected].