Description
The Techcon TS7000 8P high output IMP rotary dispensing valve is built for applications that need positive displacement control with a larger material output than a standard fine-feed setup. It supports controlled dispensing of adhesives, sealants, solder paste, grease, and filled compounds where repeatable bead size matters but the deposit is too large for a slower rotary configuration.
Where this dispensing valve is used
High output rotary dispensing is useful on assemblies that need broader beads, longer paths, or faster material placement without giving up the metering benefit of a feed-screw valve. The TS7000 platform moves material mechanically, helping the process stay more repeatable than pressure-only dispensing when viscosity, filler content, or bench temperature changes. Typical stations pair the valve with a controller, material reservoir, tubing, and outlet tip selected around the fluid being run.
The 8 pitch high output setup is best treated as a production tool, not a generic spare. Confirm deposit size, cycle rate, material viscosity, and cleaning method before release. The surrounding accessories matter just as much as the valve, since a restricted outlet or worn feed path can make a high output valve behave like the wrong part.
Setting up this dispensing valve
Install the valve with a clean material path and enough support to keep tubing from pulling on the valve body. Purge until the bead is consistent, then record speed, pressure, and timing settings once the process is stable. Keep compatible tips, seals, fittings, and feed-path parts nearby so maintenance can respond quickly if bead size changes or material begins to build up near the outlet.
| SKU | TECTS7000-8HO |
|---|---|
| Product Type | IMP rotary valve |
| Pitch | 8 pitch |
| Configuration | High output |
| Use | Positive displacement dispensing |
| Unit | Each |
For feed paths, outlet tips, controllers, tubing, and service parts, browse dispensers, mixers, and nozzles. For manufacturer background on Techcon rotary dispensing systems, visit Techcon.
Need Help?
Need help sizing a high output rotary valve for your bead width or cycle rate? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.