Description
The LORD 852 acrylic adhesive is a two-part toughened structural acrylic that bonds prepared or unprepared metals and select engineered plastics at room temperature when cured with LORD Accelerator 25GB. This stainless pail supplies the adhesive side in bulk for production bonding that replaces welds, rivets, and brazed joints. Bonding at ambient temperature keeps energy cost down and frees fixtures faster than heat-cured systems.
Where the LORD 852 acrylic adhesive works
Metal fabricators use it to bond panels, frames, brackets, and enclosures without heat or mechanical fasteners. It grips a broad set of metals with minimal prep and holds some engineered plastics, so mixed-material assemblies come together in one bonding step. The paste stays put on vertical and overhead joints during assembly. The bond spreads stress across the full overlap instead of point loads, which protects thin-gauge panels from fatigue cracking.
How the LORD 852 acrylic adhesive performs
The cured joint takes high peel and impact loads with a cohesive failure mode and runs in service from minus 40 to 300 degrees Fahrenheit. It resists acids, alkalis, solvents, oils, moisture, salt spray, and weathering, and it survives e-coat bake. Strong low-temperature and fatigue behavior makes it a fit for transportation and heavy equipment. Chemical and salt-spray resistance also holds up in wash-down and coastal environments where coated fasteners would corrode.
Specifications
- Chemistry: two-part toughened structural acrylic
- Cure: room temperature with LORD Accelerator 25GB
- Service range: minus 40 to 300 F
- Packaging: stainless steel bulk pail
Order the stainless pail for high-volume 852 bonding, and keep matched LORD Accelerator 25GB on hand to complete the system. Compare related acrylic adhesives for metal and plastic bonding. The 852 adhesive belongs to the Parker LORD structural acrylic line.
Need Help?
Need help choosing between cartridge and bulk pail 852? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.