Description
The Mixpac MFQ 08-32D is a disposable QUADRO static mixer for 1:1 and 2:1 F-System cartridges. It has 32 mixing elements in an 8.7 mm bore and measures 198 mm (7.80 in) overall. It is the only 32 element model and the only straight tip model in the MFQ line, built for materials that need more mixing passes than the standard 24 element nozzles deliver.
Specifications
| Property | Value |
|---|---|
| Model | MFQ 08-32D |
| Manufacturer part no. | 116734 |
| Mixing elements | 32 |
| Inner diameter | 8.7 mm (0.34 in) |
| Overall length | 198 mm (7.80 in) |
| Mix ratios | 1:1 and 2:1 |
| Element design | QUADRO, green elements with white interface |
| Outlet tip | Straight |
| Connection | F-System twist and lock, mounts directly to cartridge |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 800 |
Where the 08-32D fits
- Only 32 element model in the MFQ line. Use it when a material streaks, shows soft spots, or cures unevenly at 24 elements.
- Only straight tip model in the line. The outlet is a flat cylinder of constant diameter rather than a tapered cone, which keeps the bore consistent right to the opening.
- Longest nozzle MFQ makes at 198 mm, 43 mm more than the 08-24T. Check fixture and enclosure clearance before switching.
- Same 8.7 mm bore as the 08-24T, so flow rate and bead size do not change when you step up the element count.
- More elements means more resistance at the gun. On higher viscosity materials, confirm your dispenser has the thrust before committing to a box.
- Mounts directly to the cartridge with a twist and lock connection. Disposable, so no purging or cleanup between batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 1:1 | 210 ml |
| F-System 200 Industrial | 2:1 | 215 ml |
| F-System 400 Industrial | 1:1 | 395 ml |
| F-System 400 Industrial | 2:1 | 400 ml |
Running a 4:1 or 10:1 cartridge instead? Use the MFQX series with the orange interface. The ratios do not interchange.
Related MFQ sizes
| Model | Elements | Bore | Tip | Choose it when |
|---|---|---|---|---|
| MFQ 08-24T | 24 | 8.7 mm | Stepped | Same bore, 43 mm shorter, less resistance |
| MFQ 08-32D (this page) | 32 | 8.7 mm | Straight | Most mixing passes, straight outlet |
| MFQ 10-24T | 24 | 10.7 mm | Stepped | Wider bore and higher flow instead of more elements |
| MFQ 07-24T | 24 | 7.5 mm | Stepped | Finer bead, 61 mm shorter |
See the full MFQ size chart for all six models with lengths, bores, and tip styles.
Common applications
- Harder-to-mix two-part adhesives that streak or cure unevenly at 24 elements
- Applications needing a consistent unstepped outlet bore
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Transportation, marine, and composite assembly with structural adhesives
- Dispensing epoxy, polyurethane, silicone, acrylic, and MMA two-part adhesives and sealants
Ordering
The MFQ 08-32D ships in factory boxes of 800 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFQ 08-32D mean?
MFQ is mixer, F-System, QUADRO design, with no X meaning the 1:1 and 2:1 version with a white interface. The 08 is the inner diameter rounded down, actually 8.7 mm. The 32 is the number of mixing elements. The D is the straight outlet tip.
What is a straight tip and when do I need one?
A straight tip is a flat cylinder of constant diameter rather than a tapered cone, so the bore stays the same right to the opening. The 08-32D is the only MFQ model with one. The stepped tips on the 07, 08, and 10 sizes taper down, and the luer tips on the 05 series mate with valves and fittings.
When do I need 32 elements instead of 24?
Step up to 32 when the mixed bead shows streaking, color variation, soft spots, or uneven cure at 24 elements. The extra passes help on materials that resist blending. The tradeoff is 43 mm more nozzle length and more back pressure at the gun. If the bead looks uniform at 24, the 08-24T is the shorter and cheaper nozzle to run.
What is the longest MFQ static mixer?
The 08-32D at 198 mm (7.80 in). The next longest is the 10-24T at 181 mm, and the shortest in the line is the 05-16L at 100 mm.
What is the difference between the MFQ 08-32D and the MFQX 08-32D?
The MFQ has a white interface and fits 1:1 and 2:1 cartridges. The MFQX 08-32D has an orange interface and fits 4:1 and 10:1. Same QUADRO element design, the same 198 mm length, and the same straight tip, but the ratios do not interchange.
Will my dispensing gun handle a 32 element nozzle?
More elements mean more resistance to flow. Manual guns with lower thrust ratios can struggle with 32 element nozzles on higher viscosity materials. If you are switching up from 24 elements, test with your existing gun before committing to a full box.
Literature and downloads
Need help?
Not sure whether you need 32 elements, or whether your gun can push one? Call (800) 220-1966 or email [email protected].









Reviews
There are no reviews yet.