Description
The Medmix Sulzer Mixpac MBH 06-11D static mixer is an 11-element mixing nozzle built for the B-System line of two-component cartridges. It snaps onto the cartridge’s bayonet fitting and blends resin and hardener into a uniform mix as the material passes through the helical elements, so the adhesive, sealant, or potting compound that reaches the substrate cures the way the manufacturer engineered it to.
Sulzer Mixpac rebranded as Medmix in 2021, so you may see this part cataloged under either name depending on the source, but the tooling, part numbers, and fit are unchanged.
What the MBH 06-11D Static Mixer Code Means
Mixpac part numbers follow a set pattern: the first number is the mixer’s nominal bore diameter in millimeters, the second number is the element count, and the trailing letter identifies the outlet style. On this model that works out to a 6mm bore, 11 mixing elements, and a D outlet, a direct, non-tapered tip sized to seat straight onto the dispensing nozzle rather than stepping down through a taper. The shorter element count suits lower-viscosity B-System materials that mix thoroughly without the longer path a heavier two-part compound needs.
| Spec | Detail |
|---|---|
| Series | MBH (B-System) |
| Elements | 11 |
| Outlet style | D, direct outlet |
| Cartridge compatibility | S-Style 50ml cartridges |
| Mix ratios | 1:1, 3:2, and 2:1 |
| Housing material | Polypropylene |
Cartridge Fit and Compatibility
The MBH series is built for B-System S-Style 50ml cartridges, the smaller-format size common on hand-gun dispensed two-part adhesives and sealants used in fabrication shops and field installation work. The bayonet attachment locks the mixer in place under hand-gun pressure without needing a threaded nut.
Applications
Fabricators and installers reach for the MBH 06-11D static mixer on cartridge-gun structural bonding, panel and fixture assembly, and general two-component sealant work sized for 50ml cartridges. Because it is a wear item rather than a reusable fitting, most shops keep a box on hand and swap a fresh mixer with every new cartridge rather than risk cross-contamination or a partially cured plug from a leftover mixer.
Chemical Concepts stocks the full dispensers, mixers, and nozzles line alongside the two-component adhesives and sealants that use them, so you can order the cartridge and the correct mixer together. For manufacturer specs on the full Mixpac static mixer line, see Medmix. Questions on ratio or cartridge compatibility before you order, call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.