Description
Techcon microvalve 6W 8P hardened part TECTS5017S-110 supports service work on precision dispensing equipment where a small valve component must be replaced by the correct part number. Use it for maintenance planning when a hardened 6W 8P microvalve spare is listed on the bench or machine record.
Techcon microvalve applications
- Replacing a worn or damaged hardened 6W 8P microvalve component.
- Supporting dispensing cells that meter adhesive, sealant, coating, grease, or process fluid.
- Keeping a targeted spare available for valve service and line-down response.
- Reducing guesswork when technicians rebuild or troubleshoot a dispensing station.
Small valve parts can have an outsized effect on deposit quality. If a component is worn, coated with cured material, or installed in the wrong valve family, operators may see inconsistent starts, poor cutoff, or deposit drift. Starting with the correct spare keeps the repair tied to the approved equipment setup.
Techcon microvalve service notes
Before installation, clean the valve cavity and inspect adjacent seals, screws, and fittings. Replace only after the dispenser is depressurized and the fluid path is safe to handle. After the repair, run a test pattern at the normal pressure, time, and tip size before releasing the bench.
For purchasing, record the exact SKU, valve family, and workcell where the part is used. A short description like microvalve part may not be enough in a drawer full of Techcon spares. Keep the part packaged and labeled until service so the hardened component is not mixed with lookalike parts.
Techcon microvalve ordering details
This SKU is supplied as a replacement component for Techcon dispensing maintenance. For related valves, nozzles, fittings, and tubing, browse Chemical Concepts dispensers, mixers, and nozzles. Manufacturer information is available from Techcon.
Need help confirming whether this spare belongs in your valve assembly? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.