Techcon TS216 Standard Nozzle, 2 in x 1/16 in, 1000/Box

Description

This Techcon standard dispensing needle gives cartridge-fed adhesives, sealants, and process fluids a 2 in outlet with a 1/16 in orifice. It fits Techcon cartridges or equivalent cartridge systems where the job needs a controlled bead, short reach, and a disposable outlet.

dispensing needle fitment and compatibility

The TS216 standard nozzle is molded for Techcon cartridge dispensing work and supplied in a bulk 1,000-count box. The natural HDPE body is intended for single-use or job-specific use, which helps prevent cured material from contaminating the next cartridge. Confirm the cartridge thread, fluid viscosity, bead width, and access point before selecting this nozzle. Keep one nozzle style tied to a validated material setup when repeat bead geometry matters.

dispensing needle pack format and use

The 2 in length works well for bench dispensing, short seams, and direct fills where a longer nozzle would bend, drag, or waste material. The 1/16 in orifice keeps the bead narrow enough for controlled placement while still allowing many adhesive and sealant materials to flow when the dispenser pressure is set correctly. Replace the outlet if cured material changes the bead shape.

Specifications

• SKU: TEC-TS216-1000
• Brand: Techcon
• Type: Standard nozzle
• Length: 2 in (50.8 mm)
• Orifice: 1/16 in (1.6 mm)
• Material: HDPE, natural
• Quantity: 1,000 per box

Build the complete cartridge setup from dispensers, mixers, and nozzles. Broader dispensing nozzle family information is available from Techcon.

Need Help?

Need help choosing a nozzle for bead width, cartridge fit, or material flow? Call (800) 220-1966 or email [email protected].