Techcon 987-1000 Pyles Nozzle, 4 in x 1/16 in, Case of 1000

Description

Techcon 987-1000 is a long Pyles nozzle for cartridge dispensing, supplied as a dispensing needle accessory for adhesive, sealant, coating, and assembly fluid placement. The nozzle is 4 inches long with a 1/16 in outlet, giving operators reach into pockets, seams, fixtures, and recessed bond lines while keeping the cartridge body clear of the work.

Where this dispensing needle fits

Use this Pyles nozzle with compatible Techcon Systems cartridges or equivalent Pyles-style reservoirs. The 4 inch body helps reach past bracket edges, cabinet corners, molded details, and other areas where a short nozzle would force the operator into an awkward angle. The 1/16 in opening sets the bead size range, so it should be matched to the material viscosity, working pressure, and desired deposit. Thicker sealants and filled compounds may need a larger outlet or a pressure check before a full production run.

How this dispensing needle supports flow control

Pyles nozzles are consumable outlet parts. Replace them when cured material narrows the opening, when the tip has been cut unevenly, or when a material change could contaminate the next job. Keeping the nozzle length and outlet size fixed in the work instruction helps maintain bead shape from operator to operator. A 1000 pack fits production cells, maintenance carts, and job boxes that need repeatable changeout without pausing the dispense setup.

Techcon 987-1000 specs

Order this nozzle when the process calls for a 4 inch reach and a 1/16 in outlet for finer bead cartridge dispensing. For related cartridges, nozzles, and dispensing accessories, browse Chemical Concepts dispensing, mixers, and nozzles. Techcon cartridge and nozzle families are available from Techcon.

Need Help?

Need help deciding whether 1/16 in is suitable for your material viscosity? Call (800) 220-1966 or email [email protected].