Description
The Techcon Viton O-ring is a 6 mm inside diameter by 2 mm cross-section dispensing valve parts replacement for small valve, fitting, and fluid-path assemblies. The 10-count pack gives maintenance teams spare seals for rebuild work where a worn O-ring can affect pressure control, fluid shutoff, or repeat dispense volume.
Where these dispensing valve parts fit
Precision dispensing equipment depends on small seals to keep air and fluid in the correct path. When a seal loses elasticity or no longer fills the groove, the valve may leak, draw air, or require extra pressure to produce the same shot. This metric O-ring is used where the assembly calls for a 6 mm ID and 2 mm cross section, so it should be matched by dimension before installation rather than selected by appearance alone.
Viton is commonly chosen in industrial fluid systems when the application calls for a fluoroelastomer seal, but final compatibility depends on the actual fluid, cleaner, and temperature exposure in the equipment. Keep this part in a labeled rebuild bin with the matching valve or fitting family. If several seal materials are stocked near each other, separate them by size and material so a technician does not install the wrong part during a short maintenance window.
How these dispensing valve parts support rebuild work
Replace the O-ring any time the old seal shows cuts, flattening, surface cracking, swelling, or residue that cannot be cleaned without damage. Clean the gland before installation, then seat the new seal evenly so it is not twisted or pinched as the hardware closes. After reassembly, check for leaks at the intended operating pressure and confirm shot repeatability before changing dispense time, reservoir pressure, or valve stroke settings.
Metric O-ring specs
| SKU | TECP3000019PK |
|---|---|
| Part type | Viton O-ring |
| Inside diameter | 6 mm |
| Cross section | 2 mm |
| Package quantity | 10 |
| Use | Dispensing valve and fluid hardware maintenance |
Order this pack with other seals, seats, fittings, and routine service parts for the same dispensing station. For related maintenance accessories, browse Chemical Concepts dispensing, mixers, and nozzles. For manufacturer category context, visit Techcon.
Need Help?
Need help confirming seal material, dimensions, or dispensing valve parts for your setup? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.