Pacer Premium Alcohol Accelerator, 2 Ounce

Description

Cyanoacrylate cure can slow on dry surfaces, wider gaps, or materials that provide little natural surface moisture. Pacer Premium Alcohol is a two-ounce accelerator used with compatible instant adhesives to shorten fixture time and support gap-filling work on thermoplastic assemblies. It can be applied before the adhesive to the prepared surface, helping technicians manage joints that otherwise cure too slowly for the production sequence.

Cyanoacrylate Accelerator Applications

Use the accelerator on clean, dry parts only after confirming compatibility with the plastic, finish, and adhesive. It fits small thermoplastic components, housings, signs, fixtures, maintenance parts, and similar assemblies where an instant adhesive needs faster surface activation. Pre-application is the preferred sequence for this product. Apply a light, even amount to one surface and allow the carrier to flash before placing adhesive on the mating surface.

Join the parts promptly and hold them in the required position through fixture. A heavy application does not guarantee a better joint. Too much accelerator can spread beyond the bond area, affect appearance, or change the cured adhesive response. Pacer product guidance also warns that post-application onto exposed instant adhesive may cause whitening. Test the complete process on representative parts before using it on finished production surfaces.

Cyanoacrylate Process Control and Handling

Separate the accelerator applicator from adhesive nozzles and work surfaces. Direct contact between the materials in a container or on a saturated tool can trigger rapid reaction. Keep the bottle closed when it is not being used, label transfer containers, and prevent lint, oil, or shop residue from reaching the treated surface. Record the chosen application method so different operators use the same amount and timing.

The alcohol carrier is flammable. Keep it away from heat, sparks, and open flame, and provide ventilation appropriate to the work area. Follow the current safety data sheet for protective equipment, first aid, storage, and disposal. Allow the treated part to dry as directed before adhesive placement. Confirm that any white residue, surface marking, or change in bond strength remains acceptable for the assembly.

Before expanding the process to a full batch, compare accelerated and unaccelerated samples. Check fixture time, appearance, handling strength, and the cured joint after the planned service exposure. Keep the adhesive amount and bond gap constant during the comparison. This simple control shows whether the accelerator solves the actual bottleneck without introducing an unacceptable surface or strength change. Document the accepted method in the work instruction.

Specifications

• SKU: PAC-FG09531
• Product: Pacer Premium Alcohol accelerator
• Package: 2 ounce bottle
• Use: compatible instant adhesive cure acceleration
• Preferred sequence: pre-apply to the prepared surface
• Primary substrate context: thermoplastic materials
• Process note: post-application may cause whitening

Choose this package for controlled bench use, process trials, and smaller assembly cells where operators need a manageable accelerator bottle. Browse related primers and accelerators for other surface preparation and cure-control products. For company information from the product-line owner, visit Super Glue Corporation.

Need Help?

Need help confirming accelerator compatibility with your instant adhesive and substrate? Call (800) 220-1966 or email [email protected].