Permabond LH050 Anaerobic Threadsealant

SKU: Permabond LH050

From: $18.37

  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now


Permabond® LH050 pipe sealant with PTFE is a general purpose pipe sealant that provides an instant air pressure seal up to 1000 PSI with limited hand tightening. After cure, the sealing capability is typically up to the burst rating of the pipe itself. The low locking strength allows for easy disassembly.

Permabond® LH050 pipe sealant performs well on most metals, particularly steel and brass. It provides an excellent alternative to pipe dopes and pipe tapes for sealing pipe joints.

LH050 It cures anaerobically when in contact with metal parts (such as a threaded pipe joint). When applied, LH050 dispenses as a smooth paste, filling the entire space between the threaded parts. It then cures at ambient temperature to form a solid plastic, completely sealing against hydraulic fluids, air, gases and chemicals. In addition, it locks the pipes, plugs, or fittings against vibration loosening, tampering, and variable temperature effects.

UL Classification:
Permabond LH050 is classified by Underwriters Laboratories Inc. ® for use in devices handling gasoline, petroleum oils, and natural gas (pressure not over 300 PSIG) not exceeding 2 in. pipe size; propane and butane not exceeding 1 in. pipe size. 66G9.

Permabond LH050 is classified by Underwriters Laboratories Inc. ® for use in sprinkler system and water spray system piping not exceeding 2 in. pipe size containing air, nitrogen, water, propylene glycol, or glycerol antifreeze solutions.

Physical Properties of Uncured Adhesive

Chemical composition Methacrylate esters
Appearance White
Viscosity @ 25°C 250,000 mPa.s (cP)
Specific Gravity 1.1
Particle size
UV fluorescence No

Typical Curing Properties

Maximum gap fill 0.5 mm (0.02 in)
Time taken to reach handling strength (M10 steel) @23°C 2 hours*
Full strength (M10 steel) @23°C 24 hours

Typical Performance of Cured Adhesive

Torque strength (M10 steel ISO10964) Break 4 N-m (35
Prevail 3 N-m (25
Compressive shear strength (steel collar & pin ISO10123) 7 MPa (1000 psi)
Coefficient of thermal expansion 90 x 10^-6 mm/mm/°K
Coefficient of thermal conductivity 0.19 W/(m.K)

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 6 in


Must Ship Freight

Country Of Manufacture



There are no reviews yet.

Be the first to review “Permabond LH050 Anaerobic Threadsealant”

Your email address will not be published. Required fields are marked *

You may also like…