Techcon Receptacle Replacement Part

Description

The Techcon receptacle is a dispenser parts replacement item for compatible dispensing-equipment service work. It is used where the original receptacle is worn, damaged, contaminated, or due for replacement during a controller, valve station, or accessory connection rebuild.

Where these dispenser parts fit

A receptacle usually serves as the fixed side of an electrical or signal connection. In a dispensing system, that can mean a controller panel, valve accessory connection, cable interface, or repairable subassembly. Confirm the pin count, electrical rating, thread, panel-mount style, and compatible machine model against the equipment manual or service drawing before replacement.

Inspect the mating plug, locking hardware, and surrounding panel before replacing the receptacle. A loose panel opening, cracked strain relief, or contaminated cable end can repeat the same failure after the new part is installed. For service records, note the machine, cable, and visible failure mode so the next maintenance pass can spot a pattern.

Keep this repair component separated from disposable fluid-path consumables such as a mixing nozzle, 2 part mixing nozzle, or jb weld mixing nozzle. Consumables are tied to adhesive cartridges and material flow, while a receptacle belongs to the equipment control or connection side of the bench. Separate storage reduces pick errors when maintenance kits include both electrical connectors and cartridge accessories.

Dispenser parts specs and ordering notes

Order by part number and compare the original receptacle before releasing a repair. For related connectors, valves, cartridges, and maintenance items, browse dispensing, mixers, and nozzles. For manufacturer background on compatible dispensing platforms, visit Techcon.

Need Help?

Need help matching a receptacle to a Techcon controller, valve, or cable assembly? Call (800) 220-1966 or email [email protected].