Techcon TS5100 Controller Reverse Signal Cable

Description

The Techcon 5100-000-030 is identified as a reverse signal cable for the TS5100 controller. It is a model-specific dispenser part intended for a TS5100 installation that calls for this exact cable. The product identity supports the controller model and reverse-signal function; it does not by itself establish connector pinout, cable length, PLC compatibility, foot-pedal compatibility, or a particular valve or pump behavior.

Where This Dispenser Part Is Used

Use this cable as a replacement or service component only when the TS5100 documentation, wiring diagram, or existing installation identifies part 5100-000-030. A reverse input may be part of a configured dispense cycle, but the resulting equipment action depends on the controller setup and connected hardware. Do not assume that this cable can substitute for another Techcon controller cable simply because the connectors appear similar.

Verification Before Installation

• Confirm controller model TS5100.
• Confirm Techcon part number 5100-000-030.
• Compare the connector and wiring designation with the applicable TS5100 documentation.
• Power down and isolate the equipment before changing controller cabling.
• Test the configured reverse input according to the equipment manual before returning the station to production.

Dispenser Parts Specifications

• Function: reverse signal cable
• Compatible controller identified by the product record: Techcon TS5100
• Brand: Techcon
• Part number: 5100-000-030

This source-bounded description avoids assigning an unverified cable length, connector standard, pinout, automation interface, or dispense result. Those details should come from the exact controller documentation and the station’s wiring record. For related controllers, valves, tips, and accessories, browse Chemical Concepts dispensers, mixers and nozzles. Current manufacturer documentation is available from Techcon.

For purchasing and maintenance records, retain the exact controller model and Techcon part number with the cable. Compare the removed cable and the documented connection before installation. This dispenser parts check helps prevent a visually similar but electrically unverified accessory from entering a production station.

Need Help?

Need help confirming the correct signal cable for a TS5100 controller? Call (800) 220-1966 or email [email protected].