Description
This Techcon M5 x 16mm pan head Phillips screw is a stainless fastener sized for mounting valve bodies, brackets, and covers on dispensing equipment. The pan head spreads clamping load over a wider bearing surface than a flat head, which suits sheet metal brackets and plastic housings that would otherwise mar or crack under a smaller head. Stainless construction resists the corrosion that builds up around bench-top dispensing stations exposed to solvent wipe-downs and humid shop air. It is a plain but essential one of the dispenser parts that keeps a valve mount tight through repeated use.
Where These Dispenser Parts Fit
Use this screw to remount a valve body bracket, secure a cover plate, or replace a stripped or corroded original on TS-series dispensing hardware. The M5 thread and 16mm length match standard bracket and housing thicknesses on Techcon’s pinch and micro-shot valve lines, and the Phillips drive works with a standard bench screwdriver or bit driver. Keeping a small stock of these dispenser parts on the bench means a loose bracket gets fixed on the spot instead of waiting on a parts order.
Dispenser Parts Specifications
| Spec | Value |
|---|---|
| Type | Pan head Phillips machine screw |
| Thread | M5 |
| Length | 16mm |
| Drive | Phillips |
| Material | Stainless steel |
Order these screws a few at a time for routine bracket and cover maintenance across a bench of dispensing valves, since a stripped Phillips head or a corroded thread is one of the more common reasons a bracket comes loose during service. Standardizing on stainless in this length also means a tech is not stuck mixing coarse and fine threads across a repair. Techcon builds the valve bodies and brackets this screw mounts. See our dispensing valves and mixer parts for matching hardware and fittings used on the same equipment.
Need Help?
Need help matching screw length to your bracket or cover thickness? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.