Description
This Chem-Set SST-636 floor tape marks hazardous areas, walkways, and exits with an alternating red and white stripe pattern that reads clearly under warehouse and shop lighting. It is built from conformable soft PVC vinyl carrying a synthetic rubber adhesive, and it goes down fast wherever a facility needs a visible line without cutting into concrete or repainting a floor section.
Where the Chem-Set SST-636 floor tape gets used
Safety and facilities teams apply it to mark machine perimeters, loading dock edges, and pedestrian lanes in general manufacturing plants. The self-extinguishing formulation and striping pattern support compliance with OSHA striping and marking requirements under paragraph 1910.144 of the Federal Register, so it fits directly into a facility’s existing hazard-marking program. Because the backing will not corrode copper, brass, steel, or aluminum, it also works around equipment bases and metal decking without leaving a residue that eats into the substrate over time.
The 6 mil gauge stands up to forklift and foot traffic better than thin marking tapes, and this striped floor tape rolls out straight off a 3 inch neutral paper core, which keeps the roll from curling at the edges during application.
How the Chem-Set SST-636 floor tape holds up
Adhesion runs 13.7 oz per inch and tensile strength holds at 15 lbs per inch, giving the tape enough grab and body to resist lifting at seams and corners. Elongation at break reaches 210%, so the tape flexes around uneven floor joints instead of tearing. Temperature resistance spans 14°F to 176°F, which covers unheated warehouse floors in winter and hot dock aprons in summer alike.
| Property | Value |
|---|---|
| Material | Conformable soft PVC vinyl |
| Adhesive | Synthetic rubber, self-extinguishing |
| Adhesion | 13.7 oz/in |
| Tensile strength | 15 lbs/in |
| Elongation at break | 210% |
| Temperature resistance | 14°F to 176°F |
| Core | 3 in neutral paper core |
| Pattern | Red and white stripe |
Rolls ship ready to lay down over clean, dry floor surfaces. For adjoining marking and masking products, browse Chemical Concepts single-sided tapes. For surface prep and application technique walkthroughs, see the Chemical Concepts YouTube channel.
Need Help?
Need help picking roll length or stripe pattern for your floor marking layout? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.