Techcon Unscreened Spatula Kit

Description

The Techcon unscreened spatula kit is a maintenance and material-handling accessory for dispensing benches that need small tools close to the valve, cartridge, or reservoir. As dispensing valve parts age, small deposits of adhesive, grease, sealant, or paste can collect around fittings, seats, and service areas. A clean spatula gives technicians a controlled way to lift, spread, scrape, or position material during setup and cleanup without reaching for oversized shop tools.

Where Dispensing Valve Parts Are Used

This kit fits maintenance stations that support adhesive dispensing valves, syringe systems, cartridge guns, and small metering equipment. Operators can use a spatula to handle test beads, remove excess compound from non-critical surfaces, move material into a waste cup, or inspect the consistency of a dispense before parts move into production. It is also useful around mixing nozzle changes and 2 part mixing nozzle setup, where a small amount of mixed material may need to be checked before the first production bead. Shops that also track jb weld mixing nozzle compatible consumables can keep this kit with their general dispensing accessories.

Service and Handling Notes

Use separate tools for different chemistries when cross-contamination could affect cure or appearance. Wipe the edge before material hardens, and discard any tool that develops nicks or residue that could scratch a finished part. For valve service, shut down pressure, remove the cartridge or feed source, and clean around the fluid path before rebuilding. The kit is unscreened, so it is best treated as a general bench accessory rather than a filtration component or process-control screen.

Quality Checks Before Use

Before a serviced valve returns to a job, run a short test dispense into a waste cup and inspect the bead for lumps, streaks, or residue from previous material. Small tools are useful during this check because they let a technician move the test bead, expose unmixed spots, and clean the work surface without disturbing the valve setup. Keep the spatula kit bagged or boxed when not in use, and separate used tools from clean tips. That keeps cured flakes away from the next cartridge and protects small metering parts during rebuild work.

Dispensing Valve Parts Specifications

Choose this kit when your dispensing cell needs dedicated small tools for service work instead of shared shop scrapers. Browse related dispensers, mixers, and nozzles for tips, barrels, cartridges, and service accessories. Techcon maintains the manufacturer line overview at Techcon.

Need Help?

Need help building a valve service kit around your cartridge, tip, or material family? Call (800) 220-1966 or email [email protected].