Description
MGQ 10-19D mixer is a disposable square-body Quadro static mixer for two-component adhesive cartridges. Published mixer references list MGQ 10-19D for 200 ml, 400 ml, 600 ml, and 1,500 ml cartridges, with integral nut mounting and use on common cartridge ratios depending on the system.
MGQ 10-19D mixer Applications
Use this nozzle when a cartridge-packed epoxy, polyurethane, silicone, acrylic, or methacrylate needs a fresh mixing path at the point of dispense. The mixer is a process consumable for production cells, repair kits, construction bonding, concrete repair, aerospace, automotive, electronics, and other two-part adhesive work. A new mixer helps protect bead quality after storage, shift changes, and material pauses.
MGQ 10-19D mixer Setup
- Confirm cartridge volume, ratio, and outlet style before threading on the mixer.
- Check that the integral nut seats squarely on the cartridge outlet.
- Purge both components before attaching the nozzle when the adhesive maker calls for it.
- Dispense a short test bead before applying material to finished work.
- Replace the mixer when cured material raises pressure or changes bead quality.
Technical Fit
Brandywine Materials identifies this mixer for 200 ml through 1,500 ml series C cartridges in 1:1 and 2:1 ratios, while broader dispensing references also show MGQ-style nozzles used across common two-component cartridge systems. Match the nozzle to the actual cartridge and adhesive data sheet before production use. Keep spare nozzles at the bench because a paused cartridge can cure inside the mixer between shots. Store unopened packs near the matching cartridges so technicians can change tips quickly during staged assembly or repair work. For related guns and tips, browse Chemical Concepts dispensers, mixers, and nozzles. Manufacturer information is available from medmix.
Ordering Help
Need help matching MGQ diameter, element count, or outlet style to your material? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.