Description
Formica Corporation 689 Flammable Solvent Cleaner & Reducer is a fast-drying, solvent-based cleaner and thinner designed for use with industrial contact adhesives and equipment maintenance. This clear, water-like solvent is formulated to effectively remove adhesive residue, clean application equipment, and adjust adhesive viscosity for spray or brush application processes.
Key Features
- Flammable solvent cleaner and reducer for industrial adhesive applications
- Fast-drying formulation supports efficient cleaning and processing
- Designed for thinning contact adhesives to desired viscosity
- Effective for removing adhesive residue from substrates and equipment
- Suitable for cleaning spray guns, hoses, rollers, and brushes
- Clear, water-like consistency for easy handling and application
- Non-ozone depleting formulation
- Compatible with a wide range of solvent-based contact adhesives
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Solvent cleaner / reducer |
| Appearance | Clear |
| Viscosity | Water-like |
| Flash Point | -20°F |
| VOC Content | 746 g/L |
| Specific Gravity | 0.764 |
| Boiling Point | 133°F (56.1°C) |
Compatible Substrates and Materials
- Solvent-based contact adhesives
- Metal equipment surfaces
- Spray systems and hoses
- Rollers and brushes
- Adhesive-contaminated substrates
Application Guidance
Use in a well-ventilated area and keep away from heat, sparks, and open flames. For thinning adhesives, add small amounts gradually while mixing until the desired viscosity is achieved. For cleaning, apply with a cloth or through equipment to remove adhesive residue, avoiding excessive saturation that may affect bonded assemblies. Do not use with aluminum or copper equipment. Store containers tightly closed in a cool, dry area.
Typical Use Cases
- Thinning solvent-based contact adhesives
- Cleaning spray guns and adhesive application equipment
- Removing adhesive residue from surfaces
- Flushing spray lines and hoses
- Maintenance of adhesive application systems
Target Industries and Buyers
- Cabinet and millwork manufacturers
- Foam and upholstery fabricators
- Industrial assembly operations
- Construction and installation contractors
- Maintenance and repair teams
Performance Advantages
Compared to general-purpose solvents, Formica Corporation 689 is formulated specifically for adhesive thinning and cleanup, providing fast drying performance and effective residue removal. Its water-like viscosity allows for easy mixing and application, while its compatibility with common contact adhesives makes it a practical solution for maintaining equipment and optimizing adhesive performance.
Common Questions
Q: What is Formica Corporation 689 used for?
A: It is used for thinning contact adhesives and cleaning adhesive application equipment and residue.
Q: Is this product flammable?
A: Yes, it is a highly flammable solvent and should be used with proper precautions.
Q: Can it be used to clean spray equipment?
A: Yes, it is suitable for cleaning spray guns, hoses, rollers, and brushes.
Q: How should it be added when thinning adhesives?
A: Add small amounts gradually while mixing to reach the desired consistency.
Q: Can it be used on bonded assemblies?
A: Use caution, as excessive solvent can penetrate seams and weaken adhesive bonds.
Q: What materials should be avoided?
A: Avoid use with aluminum or copper equipment.
Q: What is the flash point?
A: The flash point is -20°F.
Q: What safety precautions are required?
A: Use in well-ventilated areas and keep away from ignition sources such as heat, sparks, and open flames.
Reviews
There are no reviews yet.