Description
TacBond V4554 Neoprene Spray Grade Bulk Adhesive is a flammable, neoprene-based contact adhesive formulated for spray application in laminate and construction bonding. It is designed to bond decorative laminates to plywood, particle board, fabrics, and other construction substrates while providing strong adhesion, fast dry time, and dependable heat resistance in fabrication environments.
Key Features
- Neoprene spray-grade contact adhesive for laminate and construction bonding
- Excellent low-pressure sprayability for controlled adhesive application
- High bond strength for demanding fabrication and assembly work
- Fast dry time supports efficient production workflows
- Long open time helps with positioning and alignment during assembly
- Good heat resistance for durable bonded assemblies
- Can also be applied by brush or roller where needed
- Suitable for a wide range of industrial bonding applications
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Neoprene spray grade bulk adhesive |
| Adhesive | Flammable adhesive |
| Color Options | Natural, Red |
| Viscosity | 212 cPs |
| Open Time | 2 hours |
| Dry Time | 2 minutes |
| Flash Point | -4°F (-20°C) |
| VHAP | 41% by weight |
| Coverage Rate | 2.0-2.5 dry grams when spray applied and when rolled at 100% coverage |
| Mileage | 210 sq. ft. unbonded at 2.5 dry grams coverage per gallon |
| Clean Up | CBA 689 |
| Shelf Life | 1 year in unopened container |
| Solids | 17.5% +/-2% |
| Density | 6.632 lbs./gallon |
| Solvent | Methyl Acetate / Toluene / Hexane / Acetone |
Compatible Substrates and Materials
- Decorative laminates
- Plywood
- Particle board
- Fabrics
- Synthetic rubber products
- Metals
- Rigid unplasticized plastics
- Composition board
- Leather
- Construction substrates
Application Guidance
TacBond V4554 is formulated for spray application but may also be applied by brush or roller. Surfaces should be clean, dry, and prepared for bonding before application. Use only in well-ventilated areas and keep away from ignition sources. Apply adhesive evenly, allow the short dry time to pass, then assemble within the available working time and apply firm pressure for full contact. It is not recommended for postforming, and application equipment or substrates containing aluminum, copper, or copper alloys should be avoided.
Typical Use Cases
- Decorative laminate bonding
- Cabinet and fixture fabrication
- Panel bonding to plywood or particle board
- Fabric and leather bonding in industrial assembly
- General construction substrate bonding
Target Industries and Buyers
- Cabinet manufacturers
- Millwork and fixture shops
- Furniture manufacturers
- Construction material fabricators
- Industrial assembly operations
Performance Advantages
Within the spray-grade contact adhesive category, TacBond V4554 combines good low-pressure sprayability, strong bond performance, and useful heat resistance for laminate and construction bonding applications. Its fast dry time supports efficient processing, while its neoprene-based formulation is suited to a broad range of common fabrication substrates.
Ordering Information
| Part Number | Size |
|---|---|
| TB-V4554-05 | 5 Gallons |
| TB-V4554-54 | 54 Gallons |
Common Questions
Q: What type of adhesive is TacBond V4554?
A: It is a neoprene spray grade bulk contact adhesive for laminate and construction bonding.
Q: What materials can it bond?
A: It is documented for decorative laminates, plywood, particle board, fabrics, synthetic rubber products, metals, rigid unplasticized plastics, composition board, and leather.
Q: How is it typically applied?
A: It is formulated for spray application, but it may also be applied by brush or roller.
Q: Is TacBond V4554 suitable for postforming?
A: No. It is not recommended for postforming.
Q: How fast does it dry?
A: The listed dry time is 2 minutes.
Q: What colors are available?
A: The listed color options are natural and red.
Q: Are there equipment limitations?
A: Yes. Equipment containing aluminum or copper should be avoided, and copper or copper alloy substrates should also be avoided.
Q: How should it be stored?
A: Store between 60°F and 90°F (15°C and 32°C) for best performance.
Reviews
There are no reviews yet.