Description
The Techcon TS19-1 dispensing tips are 1 inch long, 19 gauge straight blunt cannulas in brown polypropylene hubs, sold in bulk boxes of 1000 for production lines that go through tips quickly. The stainless tubing is cut to length and ground burr-free, then crimped into an aluminum locking insert and molded into the hub for clean, repeatable bead control. Burr-free tubing matters for low-viscosity fluids like cyanoacrylates where a rough cannula edge causes wicking up the tip and a hanging drop on the next dispense.
Where Techcon TS19-1 dispensing tips fit
The TS series is built for general-purpose fluid dispensing across cyanoacrylates, anaerobics, low-viscosity epoxies, solvents, and UV adhesives. Color coding follows the standard tip chart, with brown reserved for 19 gauge, so operators can grab the right tip without checking labels or part numbers. Common applications include electronics assembly, medical device potting, jewelry repair, model and prototyping shops, and any production cell that needs a consistent inside diameter at moderate flow rates with reliable Luer Lock retention.
How Techcon TS19-1 dispensing tips hold up
Maximum operating pressure is 100 psi (6.9 bar). The crimped construction means there is no leak path between cannula and hub even at the top of the pressure range, which is the failure mode that shows up first on lower-grade tips. The standard Luer Lock hub fits all common syringe barrels, cartridge adapters, and pinch-valve adapters. Use with valves and barrels from Techcon or any Luer-compatible dispensing system. Buying the 1000 count box runs noticeably less per tip than smaller 50 count packs, which matters on lines that change tips every cycle to prevent fluid buildup.
Specs
| MFG Part Number | TS19-1-1000 |
|---|---|
| Brand | Techcon |
| Length | 1 inch |
| Gauge | 19 (brown) |
| Style | TS Series, Straight Blunt |
| Max Pressure | 100 psi (6.9 bar) |
| Hub | Polypropylene, Luer Lock |
| Quantity | 1000 per box |
For matching valves, barrels, cartridge adapters, and other gauges in the TS series, browse the full dispensing components catalog.
Need Help?
Need help matching tip gauge to fluid viscosity or scaling tip orders for a production run? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.