Techcon Tube Holder, 1/4 in. Dia, Black Thermoplastic

Description

The Techcon Tube Holder, 1/4 in. Dia, Black Thermoplastic mounts round tubing or a small cartridge barrel to a bench stand or dispensing arm. It rounds out a manual dispensing valve parts setup where a fixed, repeatable tube position matters from shot to shot.

Where Dispensing Valve Parts Like This Show Up

Assembly lines running manual or semi-automatic adhesive and sealant dispensing use holders like this one to keep supply tubing or a syringe barrel steady at the dispensing head. The number 4 screw clamps the 1/4 in. bore around the tube or barrel, and the thermoplastic body resists the solvents and oils common around a dispensing bench without corroding the way an unplated metal clamp does over time. Line techs mount several of these along a bracket rail to hold multiple feed lines at fixed spacing, which keeps operators from resetting position between production runs.

• Bore diameter: 1/4 in.
• Mounting: number 4 screw, hand tight or with a small driver
• Material: black thermoplastic body
• Use: holds round tubing or a small cartridge barrel on a stand or bracket
• Compatible with standard bench-mount dispensing stands and bracket rails

Fitting Dispensing Valve Parts Into an Existing Stand

Most stands built around a manual syringe platform, or similar bench-mounted dispensing frames, accept a 1/4 in. bore holder in place of a worn or missing original. Loosen the number 4 screw, slide the tube or barrel through the bore, position it at the working height, and retighten. No adhesive or press fit is required, so swapping a holder takes a couple of minutes during a changeover between product runs or when moving a feed line to a new station.

Order this holder to replace a cracked or stripped original on a manual dispensing stand, or to add a second tube position to an existing bracket. Pair it with compatible dispensers, mixers, and nozzles already running on the line. For general specifications on Techcon’s manual dispensing hardware, see Techcon.

Need Help?

Need help matching this holder to your dispensing stand or bracket rail? Call (800) 220-1966 or email [email protected].