Description
This Araldite 2014 50ml cartridge holds Huntsman Araldite 2014 A/B, a two-component, room temperature curing, thixotropic structural epoxy paste for bonding metals, electronic components, and GRP structures. The 50ml dual cartridge mixes 2:1 through a static mixer and suits repairs, small assemblies, and trial bonds where a non-sag gray paste matters.
Package Details
| Property | Value |
|---|---|
| Product | Araldite 2014 A/B two-part epoxy adhesive |
| Package | 50ml dual cartridge |
| SKU | HUN4160708 |
| Mix Ratio | 2:1 by volume, 100:50 by weight |
| Pot Life | ~40 minutes at 77°F (100 g mass) |
| Fixture Time | 3 hours (180 minutes) to reach 145 psi lap shear at 73°F |
| Gap Fill | Non-sagging up to 0.197 in (5 mm) |
| Dispensing | 50ml 2:1 gun and static mixer |
| Related Composite Product | Araldite 2014 A/B Epoxy Adhesive |
Cure Time by Temperature
| Cure Temperature | Time to 145 psi (1 MPa) Lap Shear | Time to 1,450 psi (10 MPa) Lap Shear |
|---|---|---|
| 50°F | 14 hours | 20 hours |
| 59°F | 8 hours | 11 hours |
| 73°F | 3 hours | 5 hours |
| 104°F | 60 minutes | 80 minutes |
| 140°F | 15 minutes | 20 minutes |
| 212°F | 3 minutes | 4 minutes |
Huntsman technical data sheet, lap shear strength per ISO 4587.
Lap shear data and full specifications are on the Araldite 2014 A/B composite page.
Dispensing the 50ml Cartridge
This cartridge mixes 2:1, not 1:1, so use a 50ml gun with a 2:1 plunger and a static mixer fitted to the cartridge. These are catalog pairings for the 50ml size, so call us if you want to confirm fit before you order.
Manual guns
- Chem-Set PAK-50 Manual Gun, 1:1 and 2:1 Plunger, CCH50G-1-1/2-1
- Medmix MIXPAC DMA 51 Manual Gun, 1:1 and 2:1, CON-DMA51-00-10
Pneumatic dispensers
- Medmix Pneumatic 50ml Dispenser, 1:1 and 2:1, CON-DP2K050-MR-130-001
- Medmix Pneumatic 50ml Dispenser, 1:1, 2:1 and 3:2, CON-DP2K050-12-130-101
Static mixers
- Huntsman Araldite 2000 Plus Mixer, 50 Pack, HUN1549308
- Nordson TAH 295 Series Bayonet Mixer, 20 Elements, TAH7701830
Where the 50ml Size Fits
- Repairs and small assemblies where a 200ml cartridge would be more than the job needs.
- Vertical and overhead joints where the non-sag paste has to stay put.
- Gap-filling bonds up to 0.197 in (5 mm).
- Trial bonds and process validation before you commit to a larger package.
Frequently Asked Questions
What is the mix ratio of the 50ml Araldite 2014 cartridge?
It mixes 2:1 by volume, which is 100 parts Part A to 50 parts Part B by weight. That is different from the 1:1 Araldite 2011 and 2012 cartridges, so check that your gun has a 2:1 plunger before you load it.
What gun does the 50ml Araldite 2014 cartridge use?
It uses a 50ml gun with a 2:1 plunger. Catalog pairings include the Chem-Set PAK-50 and Medmix DMA 51 manual guns and Medmix pneumatic dispensers, all listed above. Call us if you want to confirm fit with your gun before you order.
What mixer does the 50ml Araldite 2014 cartridge use?
Huntsman lists the Araldite 2000 Plus Mixer for its 50ml cartridges, sold in a 50 pack. The static mixer meters the 2:1 ratio as you dispense, so the cartridge needs a mixer fitted before use. The Nordson TAH 295 bayonet mixer is a catalog pairing if you already run it.
Is the 50ml cartridge the same adhesive as the 200ml cartridge?
Yes. Both sizes are Araldite 2014 A/B and both mix 2:1. The package changes, but the adhesive does not. The Araldite 2014 A/B composite page has the lap shear data and full specifications for every size.
Questions on fit for your bonding application? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.