Techcon 20 oz Barrier Taped Techkit Less Bag

Description

The Techcon 20 oz barrier taped Techkit less bag is a disposable packaging kit for two or three component resin systems run through cartridge dispensing guns. These dispensing valve parts help keep base and hardener separated until the package is ready to dispense, then route the material through the internal mixing path for controlled bead placement.

Where dispensing valve parts fit

Use this 20 oz barrier taped kit when a job needs more material capacity than a small syringe or 2.5 oz package can hold. The less bag format is used where the foil seal bag is sourced separately or not required by the packaging process. The kit belongs with compatible 20 oz cartridges, rods, plungers, end caps, and air or manual guns from the same Techkit family.

Barrier-style Techkits are built for multi-component materials that must stay separated before use. That makes them useful for adhesive and resin packaging work where cleanup needs to stay low and the whole package can be discarded after dispensing.

During setup, confirm that the package style, rod, cartridge body, plunger, and end cap are staged together. Keep filled packages labeled by resin system and ratio so the bench team can match the right gun and outlet hardware before dispensing starts.

dispensing valve parts specifications

Before ordering, confirm the 20 oz package size, barrier-taped configuration, bag requirement, rod length, and compatible gun. This item is the Techkit packaging component; outlet mixers and other dispensing valve parts must be selected separately for the material system. Browse compatible dispensers, mixers, and nozzles. Current Techkit family information is available from Techcon.

Need Help?

Need help matching a Techkit size to a cartridge gun or resin package? Call (800) 220-1966 or email [email protected].