Techcon TS1258-VIT Viton O-Ring Kit, 6.0 mm ID

Description

Techcon TS1258-VIT O-Ring Kit is a dispensing valve parts kit for service work on compatible Techcon dispensing equipment. The kit supplies Viton O-rings with a 6.0 mm inside diameter for maintenance teams that need seal replacements during teardown, cleaning, and rebuild work.

dispensing valve parts for Seal Service

• Viton O-rings support service work where compatible chemicals and temperatures call for that elastomer.
• 6.0 mm inside diameter gives technicians a defined replacement size.
• Kit format keeps small seals grouped for bench repair and spare inventory.
• Useful during valve cleaning when worn, swollen, or nicked seals are found.
• Part-numbered replacement helps keep maintenance records clear.

Use this kit only where the service drawing, removed seal, or equipment procedure confirms the same O-ring material and size. Clean grooves before installing new seals, avoid sharp tools that can nick the elastomer, and apply only the lubricant approved for the valve and material path. After rebuild, pressure-test the assembly before returning it to adhesive, sealant, coating, or compound dispensing.

Where these dispensing valve parts Fit

• Techcon valve rebuilds that call for Viton O-rings.
• Maintenance carts that stock seals beside fittings, tubing, screws, and caps.
• Repair work after material changeover, cleaning, or leakage at a seal location.
• Preventive maintenance programs that refresh seals before failure.

Technical Specifications

Packaging and Ordering

Order this kit when a compatible Techcon setup needs 6.0 mm ID Viton seal replacements. Browse related dispensers, mixers, and nozzles for valves, tubing, fittings, and service hardware. Current manufacturer background is available from Techcon.

Need Help?

Need help confirming O-ring material, seal size, or valve fit before ordering? Call (800) 220-1966 or email [email protected].