OILER CUP FOR TS941/TS941A

Description

The Techcon oiler cup for the TS941 and TS941A spool valves holds a small reservoir of oil above the valve’s upper seal, creating an additional liquid seal that keeps moisture out of the spool bore during pneumatic dispensing. As one of the dispensing valve parts that directly affects seal life, this cup is a simple, low-cost way to extend service intervals on a valve that runs daily production cycles across an electronics assembly or general manufacturing line.

Dispensing Valve Parts Specifications

Why These Dispensing Valve Parts Matter

The TS941 and TS941A use an oil chamber above the upper seal specifically to prevent moisture from being carried onto the spool during actuation. Without oil in the cup, that seal dries out faster and the spool wears unevenly, leading to inconsistent shot size and eventual leakage around the seal. Keeping the cup filled is one of the simplest preventive maintenance steps available on these valves, and takes only a moment during a routine line check. Operators running several valves across a shift often check oil level alongside a daily pressure check.

Where This Part Fits in a Dispensing Setup

This oiler cup is a direct fit for Techcon TS941 and TS941A spool valves used throughout CC’s dispensers, mixers, and nozzles line. Replacing a cracked or missing cup restores the valve’s moisture barrier without a full seal kit rebuild, and is worth checking any time a valve starts showing early seal wear.

Full valve specifications and seal kit documentation are available from Techcon. Chemical Concepts stocks this and other dispensing valve parts for TS941/TS941A maintenance across electronics assembly and general manufacturing lines. For fit or compatibility questions, call (800) 220-1966 or email [email protected].