Description
The Mixpac MFQX 08-32D is a disposable QUADRO static mixer for 4:1 and 10:1 F-System cartridges. It has 32 mixing elements in an 8.7 mm bore and measures 198 mm (7.80 in) overall. It is the only 32 element model and the only straight tip model in the MFQX line, built for materials that need more mixing passes than the standard 24 element nozzles deliver.
Specifications
| Property | Value |
|---|---|
| Model | MFQX 08-32D |
| Manufacturer part no. | 116735 |
| Mixing elements | 32 |
| Inner diameter | 8.7 mm (0.34 in) |
| Overall length | 198 mm (7.80 in) |
| Mix ratios | 4:1 and 10:1 |
| Element design | QUADRO, green elements with orange interface |
| Outlet tip | Straight |
| Connection | F-System twist and lock, mounts directly to cartridge |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 800 |
Where the 08-32D fits
- Only 32 element model in the MFQX line. Use it when a material streaks, shows soft spots, or cures unevenly at 24 elements.
- Only straight tip model in the line. The outlet is a flat cylinder of constant diameter rather than a tapered cone, which keeps the bore consistent right to the opening.
- Longest nozzle MFQX makes at 198 mm, 43 mm more than the 08-24T. Check fixture and enclosure clearance before switching.
- Same 8.7 mm bore as the 08-24T, so flow rate and bead size do not change when you step up the element count.
- More elements means more resistance at the gun. On higher viscosity materials, confirm your dispenser has the thrust before committing to a box.
- Mounts directly to the cartridge with a twist and lock connection. Disposable, so no purging or cleanup between batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 4:1 | 225 ml |
| F-System 200 Industrial | 10:1 | 250 ml |
| F-System 400 Industrial | 4:1 | 415 ml |
| F-System 400 Industrial | 10:1 | 490 ml |
Running a 1:1 or 2:1 cartridge instead? Use the MFQ series with the white interface. The ratios do not interchange.
Related MFQX sizes
| Model | Elements | Bore | Tip | Choose it when |
|---|---|---|---|---|
| MFQX 08-24T | 24 | 8.7 mm | Stepped | Same bore, 43 mm shorter, less resistance |
| MFQX 08-32D (this page) | 32 | 8.7 mm | Straight | Most mixing passes, straight outlet |
| MFQX 10-24T | 24 | 10.7 mm | Stepped | Wider bore and higher flow instead of more elements |
| MFQX 07-24T | 24 | 7.5 mm | Stepped | Finer bead, 61 mm shorter |
See the full MFQX size chart for all six models with lengths, bores, and tip styles.
Common applications
- Harder-to-mix two-part adhesives that streak or cure unevenly at 24 elements
- Applications needing a consistent unstepped outlet bore
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Transportation, marine, and composite assembly with structural adhesives
- Dispensing epoxy, polyurethane, silicone, acrylic, and MMA two-part adhesives and sealants
Ordering
The MFQX 08-32D ships in factory boxes of 800 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFQX 08-32D mean?
MFQ is mixer, F-System, QUADRO design. The X marks the 4:1 and 10:1 version with an orange interface. The 08 is the inner diameter rounded down, actually 8.7 mm. The 32 is the number of mixing elements. The D is the straight outlet tip.
What is a straight tip and when do I need one?
A straight tip is a flat cylinder of constant diameter rather than a tapered cone, so the bore stays the same right to the opening. The 08-32D is the only MFQX model with one. The stepped tips on the 07, 08, and 10 sizes taper down, and the luer tips on the 05 series mate with valves and fittings.
When do I need 32 elements instead of 24?
Step up to 32 when the mixed bead shows streaking, color variation, soft spots, or uneven cure at 24 elements. The extra passes help on materials that resist blending. The tradeoff is 43 mm more nozzle length and more back pressure at the gun. If the bead looks uniform at 24, the 08-24T is the shorter and cheaper nozzle to run.
What is the longest MFQX static mixer?
The 08-32D at 198 mm (7.80 in). The next longest is the 10-24T at 181 mm, and the shortest in the line is the 05-16L at 101 mm.
Will my dispensing gun handle a 32 element nozzle?
More elements mean more resistance to flow. Manual guns with lower thrust ratios can struggle with 32 element nozzles on higher viscosity materials. If you are switching up from 24 elements, test with your existing gun before committing to a full box.
Will the MFQX 08-32D work on a 1:1 cartridge?
No. MFQX nozzles are built for 4:1 and 10:1 ratios and carry an orange interface. For 1:1 and 2:1 F-System cartridges, use the MFQ series with the white interface.
Literature and downloads
Need help?
Not sure whether you need 32 elements, or whether your gun can push one? Call (800) 220-1966 or email [email protected].











Reviews
There are no reviews yet.