Polytek 74-29 Polyurethane Liquid Mold Rubber

$143.00
SKU
POL-POLY7429

Poly 74-29 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a Shore A30 rubber. Available in white or black. This is a pourable rubber, but it can be easily thickened with PolyFiber II Thickener for brush-on application.

Mix Ratio: 1A/1B by weight
Shore Hardness: A30
Cured Color: White or Black
Mixed Viscosity: 2800cP

Shake or Stir Part B before use. The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected. For additional physical property specifications, refer to the Physical Properties Bulletin.

Poly 74-Series Liquid Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible, high-strength, mold rubbers. Poly 74-Series Rubbers make durable, easy-releasing molds for casting plasters and waxes without release agents. When Poly 74-Series molds are properly prepared, they are also excellent for casting concrete and various resins, such as epoxy, polyester, polyurethane and acrylic. Countless decorative concrete applications require liquid mold rubbers for casting, forming or texturing concrete into artful, realistic shapes and colors. Polytek® room-temperature curing polyurethane and silicone mold systems are used to make molds to produce a wide variety of precast concrete products. 

Write Your Own Review
You're reviewing:Polytek 74-29 Polyurethane Liquid Mold Rubber