Description
The Cox AirFlow 2 CBA S50 10:1 dispenser is an air-powered, two-component dispenser for 50 mL S-System round back cartridges at a 10:1 ratio. It is used for bead dispensing in bonding, sealing, and shimming work, where air pressure replaces hand pressure on the trigger. An adjustable air regulator, air return, and quick exhaust valve give the operator control over the bead and help prevent run-on.
Older paperwork may list this tool as A50S/10 or DP2 A050S-10. The current part number is DP2C 050-10-070-211.
Key Product Details
| Property | Value |
|---|---|
| Brand | Cox (medmix) |
| Manufacturer Part Number | DP2C 050-10-070-211 |
| medmix Material Number | 159364 |
| Previous Part Numbers | A50S/10, DP2 A050S-10 |
| Drive | Pneumatic |
| Components | Two-component |
| Cartridge Capacity | 50 mL (1.7 oz) |
| Cartridge Ratio (this part number) | 10:1 |
| Cartridge Compatibility | MIXPAC S-System 50 mL, round back |
| Viscosity Range | Low to medium |
| Maximum Pneumatic Pressure | 50 psi (3.5 bar) |
| Air Consumption | 40 liters/min |
| Weight | 4.81 lb (2.2 kg) |
| Frame Length | 8.5 in (216 mm) |
| Handle and Cartridge Holder Material | Glass fiber reinforced nylon |
| Standard Color | Black/Gray |
| Tool Component Approvals | CE, REACH |
Performance in Production
- The adjustable air regulator sets output pressure anywhere up to the 50 psi maximum, so the operator can match the bead to the material instead of fighting the trigger.
- Minimum trigger pressure keeps trigger effort light across a shift of repeat dispensing, which cuts hand fatigue on 50 mL cartridge work.
- Air return and the quick exhaust valve help stop flow when the trigger is released, which prevents run-on at the end of a bead.
- Air consumption is 40 liters per minute, so size the shop air line and regulator for that draw before you put the tool on a bench with other air tools.
- At 4.81 lb (2.2 kg) with a glass fiber reinforced nylon handle and cartridge holder, the tool stays light enough for bench or line work.
- The tool is rated for low to medium viscosity materials. For heavier pastes, call us before you order.
Common Applications
- Bonding with 50 mL two-component cartridges
- Sealing with 50 mL two-component cartridges
- Shimming with 50 mL two-component cartridges
- Bead dispensing of 10:1 cartridge materials where air control is preferred over hand pressure
Available Sizes
- Each, 50 mL cartridge capacity, 10:1 ratio. SKU COX-DP2C050-10-070-211 (manufacturer part number DP2C 050-10-070-211)
Related Products
- Sulzer Medmix DS51 Dispensing Gun for 50 mL 10:1 Round Back (manual gun for 50 mL 10:1 round back cartridges)
- Cox AirFlow 2 CBA S50 50 mL Pneumatic Dispenser, 1:1, 2:1 and 3:2 Round Back (same tool for S-System round back cartridges at 1:1, 2:1, and 3:2)
- Cox AirFlow 2 CBA R50 50 mL Pneumatic Dispenser, 4:1 and 10:1 (for square back cartridges at 4:1 and 10:1)
How Pneumatic 50 mL Cartridge Dispensing Works
A pneumatic dispenser uses shop air to push the cartridge plungers, so the operator controls the bead with the regulator and trigger instead of squeezing a manual gun. The steps below follow the controls on the AirFlow 2 CBA.
- Confirm the cartridge is a 50 mL S-System round back cartridge that runs at 10:1. For square back cartridges, use the 4:1 and 10:1 R50 version listed under Related Products.
- Connect shop air and keep the supply at or below the 50 psi maximum.
- Set the regulator low, then raise pressure until the bead is steady for your material.
- Fit the mixer nozzle your cartridge system calls for and dispense. Minimum trigger pressure keeps the pull light.
- Release the trigger. Air return and the quick exhaust valve help stop the flow so the bead ends cleanly.
The tool is rated for low to medium viscosity materials and handles bonding, sealing, and shimming beads.
Frequently Asked Questions
What is the Cox AirFlow 2 CBA S50 10:1 dispenser used for?
It is a pneumatic dispenser for 50 mL two-component cartridges, used to apply beads for bonding, sealing, and shimming. Pneumatic dispenser, pneumatic dispensing gun, and air-powered cartridge gun all describe the same kind of tool.
What is the old part number for the AirFlow 2 CBA S50 10:1?
The old item number is A50S/10 and the old material description is DP2 A050S-10. The current part number is DP2C 050-10-070-211, and the medmix material number is 159364.
Which cartridges does it fit?
It fits S-System 50 mL round back cartridges at a 10:1 ratio. For S-System cartridges at 1:1, 2:1, or 3:2, use the S50 dispenser for 1:1, 2:1, and 3:2.
Does it fit square back cartridges?
No. For square back A-System and B-System cartridges at 4:1 and 10:1, use the R50 dispenser for 4:1 and 10:1.
Is there a manual gun for 10:1 round back cartridges?
Yes. The Sulzer Medmix DS51 manual gun is made for 50 mL 10:1 round back cartridges.
What air pressure does it need?
Maximum pneumatic pressure is 50 psi (3.5 bar). Air consumption is 40 liters per minute, and the adjustable regulator sets the working pressure below that limit.
What viscosity can it dispense?
It is rated for low to medium viscosity materials. If your material is thicker, call us before ordering.
Are the components CE and REACH approved?
Yes. Cox lists CE and REACH as the tool component approvals.
Questions on fit for your dispensing setup? Call (800) 220-1966 or email [email protected].
COX, MIXPAC, and MK are brands of medmix.
Reviews
There are no reviews yet.