American Ultraviolet Cool Cure Beam LED Spot Curing System – 365nm

Description

The Cool Cure Beam UV curing light is a cordless 365 nm LED unit for localized curing of compatible UV adhesives, coatings, and inks. Its handheld format helps technicians reach small assemblies, repair areas, and workstations where a fixed curing system would be impractical.

Where the Cool Cure Beam UV Curing Light Fits

The standard 3 mm circular beam concentrates energy on a small target area for tacking bond points, curing short beads, and processing compact parts. Portable operation is useful for prototype work, field repairs, inspection stations, and low-volume assembly. The listed 365 nm wavelength must match the photoinitiator response of the material being cured; verify the adhesive or coating manufacturer’s recommended wavelength and dose before production use.

Operation and Process Control

The standard system delivers 5 W/cm² intensity and uses an instant on/off trigger, avoiding lamp warm-up time between cycles. Two rechargeable batteries are included, with up to four hours of operating time per battery under the manufacturer’s stated conditions. Cure results still depend on distance, exposure time, material depth, opacity, and the condition of the optical lens.

1. Confirm that the UV material is compatible with 365 nm LED output.
2. Wear the supplied protective equipment and shield nearby operators from direct or reflected UV exposure.
3. Keep the lens clean and position the beam at the validated working distance.
4. Use a timed exposure established through cure testing on the actual assembly.
5. Inspect the cured area and monitor output as part of routine process control.

Browse related curing equipment and hardware, and review the American Ultraviolet Cool Cure Beam specifications.

Need Help?

Need help matching wavelength, intensity, or exposure time to a UV-curable material? Call (800) 220-1966 or email [email protected].