Description
The collar, fan spray, is one of the dispensing valve parts that threads onto the nozzle end of a Techcon TS5520F spray valve to hold the fan cap and air cap in fixed alignment. Correct collar torque keeps the fan pattern centered and repeatable from cycle to cycle.
Where This Collar Fits Among Dispensing Valve Parts
This collar is specific to the fan nozzle configuration on the TS5520 platform, used wherever a shop needs a wide, even spray stripe for conformal coating, release agents, or light lubricant application instead of a small round deposit. It clamps the fan cap and air cap against the valve body so the assembly does not shift under repeated actuation.
How These Dispensing Valve Parts Hold Up
A loose or worn collar lets the fan cap rotate slightly out of alignment, which skews the pattern off center. Checking collar tightness during scheduled valve maintenance, alongside the o-ring and seal inspection, keeps the fan spray centered on target through high-cycle production runs.
TS5520F Collar Specifications
| Attribute | Detail |
|---|---|
| SKU | TEC5520F-000-002 |
| Fits | Techcon TS5520F fan spray valve |
| Function | Secures fan cap and air cap in fixed alignment |
| Works with | Fan spray assembly cap and air cap (5520F-000-000, 5520F-000-001) |
| Valve max. fluid pressure | 100 psi (6.9 bar) |
Order a replacement collar when the fan pattern on your TS5520F drifts off center or the nozzle assembly feels loose at the valve tip. Our dispensing valves, mixers, and nozzles category also stocks related supplies for adjacent adhesive dispensing needs. Full assembly and torque guidance is in the Techcon TS5520 user guide.
Need Help?
Need help realigning the fan pattern on your TS5520F valve? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.