Description
The 18×24 workstation bracket supports a countertop, workbench, or ADA station overhang up to 18 inches wide and 24 inches deep, with a stainless steel finish built for wet or high-use areas. It bolts to load-bearing wall studs and carries the work surface from below, so no leg or post interrupts the space underneath.
Where the 18×24 Workstation Bracket Is Used
This size fits larger kitchen peninsulas, wet bar overhangs, commercial prep counters, and ADA-compliant service stations built on an 18 by 24 inch overhang. The stainless finish holds up to repeated wipe-downs and washdown cleaning, making it the stronger choice over painted or primed brackets wherever moisture or frequent cleaning is part of daily use. Because the finish is worked into the base metal rather than applied as a coating, it will not chip, peel, or need refinishing over the life of the install.
How the 18×24 Workstation Bracket Holds Up
Each bracket mounts to load-bearing studs and is rated to support an overhang extending up to 6 inches beyond its own length, the same engineering standard used across the CounterBalance line. The stainless finish needs no paint or touch-up over time, and the same 18×24 size is also available in other CounterBalance finish options when corrosion resistance is not the deciding factor.
Specifications
| Spec | Detail |
|---|---|
| SKU | CCH-CBWB1824SS-US |
| Size | 18 in x 24 in |
| Overall Dimensions | 18 in x 2 in x 24 in |
| Weight | 5.17 lb |
| Finish | Stainless Steel |
| Country of Manufacture | USA |
| Max Overhang | Up to 6 in beyond bracket length |
The full CounterBalance Workstation Bracket size range is available in the countertop bracket category, and the Industrial Fasteners Institute’s reference on anchor and mounting hardware covers general load-bearing mounting practice.
Need Help?
Need help sizing a bracket to a large overhang or comparing finish options? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.