CounterBalance Workstation Bracket, 24 x 29 Inch, Gray

Description

The CounterBalance 24×29 Workstation Bracket is a large gray support for deep countertops, workbenches, floating desks, garage storage, computer stations, and ADA work surfaces. Its 24 inch wall leg and 29 inch support arm create a rigid connection between a load-bearing wall structure and the underside of the work surface. The open bracket profile keeps support visible and serviceable while avoiding floor-mounted legs beneath the station.

Where the CounterBalance 24×29 Workstation Bracket Fits

This size is intended for deeper work surfaces where a shorter bracket would leave too much unsupported overhang. The bracket attaches to load-bearing studs, so framing location and condition must be confirmed before installation. It can be used at fabrication benches, wall-mounted service counters, office workstations, accessible counters, garage shelves, and similar surfaces that need clear knee or storage space below.

The gray finish provides a neutral option for exposed installations. At 24 x 29 inches, the bracket should be laid out with the long arm under the surface and the wall leg secured plumb to structural framing. Bracket spacing, fastener type, wall construction, surface material, and expected load all affect the finished assembly. Project drawings or an engineer should define those details when the surface carries concentrated, dynamic, or safety-critical loads.

Installation Planning

Locate each stud before drilling, check for utilities, and confirm that the wall can transfer the design load. Use fasteners sized for the framing material and the bracket holes. Keep the top edge level across the bracket set so the work surface does not rock or twist when it is fastened. The surface should sit fully on the support arm without debris, high fastener heads, or uneven shims creating point loads.

The product family is designed to support a work surface that extends beyond the bracket arm, with the exact allowable overhang governed by the system design and job conditions. Do not apply a generic load rating to an installation that uses different framing, spacing, fasteners, or surface materials. Verify the complete assembly before occupancy or equipment placement.

During layout, keep bracket positions coordinated with countertop seams, sinks, cable openings, drawer hardware, and wall obstructions. A bracket that lands behind a cutout or outside structural framing cannot deliver the intended support path. Mark every location before the surface arrives, then compare the installed spacing with the approved plan. Finish work should not conceal loose fasteners, damaged coating, bent steel, or gaps between the wall leg and framing.

Product Specifications

Inspect brackets and fasteners before covering or loading the surface. The 24 x 29 size and gray color should be confirmed against the project schedule because this family is offered in multiple dimensions and finishes. Order enough brackets for the approved spacing plan, including any support required at seams, cutouts, corners, or equipment locations.

Browse Chemical Concepts countertop support brackets for other profiles and sizes. For application videos and installation technique examples, visit the Chemical Concepts video library.

Need Help?

Need help confirming bracket size, finish, or spacing for a work surface? Call (800) 220-1966 or email [email protected].