Techcon TS924V Foot Valve Dispenser with Vacuum

Description

Techcon TS924V foot valve dispenser is a floor-mounted dispensing valve with vacuum control for manual air-powered dispensing. It gives operators foot-actuated control over output rate and shot size, with a built-in pressure regulator, pressure gauge, and fast-dump three-way air valve for general adhesive, sealant, coating, and compound work.

dispensing valve for Foot-Controlled Output

The TS924V fits benches where a simple pneumatic dispenser is preferred over an electric controller. The operator starts and stops flow with the foot pedal while the regulator and gauge help set repeatable pressure. Vacuum suck-back can help reduce tailing or dripping on many low and medium viscosity materials when the setup is tuned correctly.

Where a dispensing valve Fits

• Manual bead, dot, and potting work at assembly benches.
• Adhesive, sealant, coating, and compound dispensing where foot control keeps both hands free.
• Production areas where a basic floor-mounted pneumatic unit is easier to place than a benchtop controller.
• Applications that need operator-controlled shot size rather than a timed digital cycle.

Technical Specifications

Set the pressure to the lowest level that produces a clean deposit, then tune the vacuum carefully so material does not pull back too far into the air line or fluid path. Test the setup with the actual material, tip, and container before releasing the station for production. Keep the pedal area clear so operators can cycle the dispenser without awkward foot position.

Document the first acceptable pressure, tip size, stroke or timing setting, and material package for each job. That record helps the next technician return to a known setup after cleaning, part replacement, or a material change.

Ordering Support

Browse related dispensers, mixers, and nozzles for cartridges, tips, pressure pots, tubing, and valves. Current manufacturer information is available from Techcon. For help matching a dispenser to material viscosity and package style, call (800) 220-1966 or email [email protected].